The CL pump is triggered by a switch in the vacuum servo in the door, so you probably have a broken circuit or bad connection there. Test continuity between the vacuum servo & the pump, IIRC the wire is green/blue.
Also if your remote locking is aftermarket they will have spliced this wire to connect the RCL, so this connection or indeed the alarm or RCL control unit could be at fault.
EDIT: see attached wiring diagram
Also if your remote locking is aftermarket they will have spliced this wire to connect the RCL, so this connection or indeed the alarm or RCL control unit could be at fault.

EDIT: see attached wiring diagram
never had a single false alarm or any other issue in 7 years.


Comment