schrick cams?

[zlobo]

Have anyone of you tryed out the schrick cams?
How are the caracter of them? i am using curently using 7a cams
and i am thinking of replacing them to schrick but first i am curius what you say?

[caterpillar]

try this instead: www.catcams.be

[zlobo]

try this instead: www.catcams.be

have you tested them?

[robo]

have you tested them?

I will be testing them in 2-3 months

[caterpillar]

if they had beeen bad,we(on this forum) have heard it!! the firm are commen known

[Audi Parts Guru]

Schrick generally make very good products

[zlobo]

i know but i am mostly intresting where i get more winn.. at low rpm high and how they act.. i am thinking of geting out 500-600 hp with my new engine... or shuld i stick to my old 7a cams in the engine?

Caterpillar: meybe i shuld talk to kaj backe he probably knows..

[philip walker]

I would suggest David Newman camshafts.
Quality blanks cut to any spec and lift.
pm if you need any info

[philip walker]

if they had beeen bad,we(on this forum) have heard it!! the firm are commen known

What is the story with "cat cams" then??

[caterpillar]

shrick vs catcams

catcams have many several options...from low end streetcams to the fullrace.
shrick have not many cams for the IL5....

[elijahallens2]

I have a set of cat cams that I never installed. They were called their fast road cams, they are meant for people who still drive on the street but like to track their car as well. I ended up using the 7A cams because the cat cams have adjustible sprockets and need the pickup wheel modified if used on the AAN/ADU engine and I just didn't know enough to do this on my own. I spent $1200 on them so they are some expensive paperweights. If anyone is interested in these PM me with an offer. Here is a picture.

Elijah

[caterpillar]

catcams

these cam was very far avay the price was ok,but thew freight cost and the norwegian custom cost

[Albert]

I could have Schick cams. Is anyone using them ? I have 7A exhoust cam now.

Power around 450KM (GT3017R); power range 3500 - 7000 rpm

246 E1 601-01; Cam lift 10,9; Duration ° CRA Intake/Exhaust Peak Timing 260/ /112; Valve timing 18-62-; Valve lift at 0,8 hydr.
246 A1 601-01; Cam lift 10,9; Duration ° CRA Intake/Exhaust Peak Timing /260/112; Valve timing -62-18; Valve lift at 0,9 hydr.

[Animal Mother]

Piper cam shafts and Kent cam shafts are very popular in the UK and are very widely used by street, race and professional teams.
Never heard of those others.

[Albert]

What part nr would you advise ? I would like to have a good flat Nm, not top HP.