schrick cams?

[Ducky]

Supposedly Newman makes the cams for some 'other' well known sellers, my brother has spoken to him ages ago and he certainly seemed clued up on the subject.

[terrybullwon]

Did any buy the schrick cam shafts in the end?

[Rusty]

There's als Dbillas. Same cost as Catcams ish.

[terrybullwon]

funny i have just emailed them.. are you sure they are the same?

[Rusty]

MIght have been speaking out my derrier ...

950 euros so when I last looked that was £700 ish, now it's a bit more

http://www.dbilas-dynamic.de/dbilas_eng/index.htm

[add]

Piper cam shafts and Kent cam shafts are very popular in the UK and are very widely used by street, race and professional teams.
Never heard of those others.

I think piper only have off the shelf cams for the 10v engine,kentcams don't list anything
for 5 cylinder audis,may have done them in the past though,otherwise it would be a custom job from either of them-just thinking out loud

[Rusty]

I emailed Kent and they asked if it was a special version of the 4 pot 1.8 20v despite me giving them all the info on the car. Not a good start... Some regrinds would be nice, £200 a set normally. Wonder if they have any profiles on file?

[terrybullwon]

I emailed Kent and they asked if it was a special version of the 4 pot 1.8 20v despite me giving them all the info on the car. Not a good start... Some regrinds would be nice, £200 a set normally. Wonder if they have any profiles on file?

I have a recipe :mischeif:

[Puglife]

few 10v people are looking into the shrick 276 camshafts for £350 mark, good camshafts but not sure on 20v variety or whats available.

[repo]

Catcams wear out. Seen a lot of worn cats, in I5's and other motors. Including my ex opel.

Never seen a worn Schrick, and I have installed quite a few.

Schrick also does custom profiles, long lead time though..

[caterpillar]

carcams

any pics on the worn out catcams:mischeif:

[Audi_CQ]

Catcams wear out. Seen a lot of worn cats, in I5's and other motors. Including my ex opel.

Never seen a worn Schrick, and I have installed quite a few.

Schrick also does custom profiles, long lead time though..

Had two sets of Cat Cams(mechanical) with wear issues, or rather one set of cams and the other time it was the lifters. Now they use a new hardening process and new coated lifters(mechanical). Cat Cams replaced everything under warrenty.

[Ian Simmonds]

The Schrick Cams we've been buying for the 10v's recently have all been Factory Audi Camshaft blanks turned to the requested profile... Even have the Audi logo and part number.

[JP]

Catcams wear out. Seen a lot of worn cats, in I5's and other motors. Including my ex opel.

Never seen a worn Schrick, and I have installed quite a few.

Schrick also does custom profiles, long lead time though..

Strange considering both their blanks come from the same factory in Turkey alongside several other main brands.

[Ian Simmonds]

Here's the Schrick Catalogue page for Audi

The 20v's and tech details are at the very bottom



Ignore the prices, what with the pound being a bit limp.