Hiya i have a thin pipe missing off the wastegate and wanted to know if this would cause performance issues. The pipe connects to a thin nipple like fitting. (if that helps)
Announcement
Collapse
No announcement yet.
pipe missing off wategate?
Collapse
X
-
everyone always asks this question!!!
Nothing is supposed to be connected to this Andy. It's ony there for testing purposes. Nothing to worry about.
Cheers!
MartynLast edited by Martynf; 14 January 2004, 10:51.
-
On my urq it connects to the metering head, where the breather pipe connects, nobody seems to know why though, there's not enough vacuum there to lift the WG valve on shut off.
On early urs the WG was operated by the EM pressure, if the WG diaphragm burst the fumes would be piped back into the inlet, maybe this is why.
Filter on this would just be to keep muck and condensation out of the WG obviously it has to breathe in and out as it opens and closes. Seems quite a good idea to me.
Comment
Comment