I5 - Tommis - Billet Steel Gear Crankshaft & Bolt ?

[macspring]

Hi Guys,

I'd like to buy one of these for my AAN.


https://www.ebay.ie/itm/Steel-Gear-C...gAAOSwWflZ7lrp


This seller may not ship to Ireland. I was wondering if there is somewhere else I can buy one of these ?

Also, the big bolt that holds this in place may be NLA ?

Does anyone have any other sources for this bolt ?

Does the bolt strictly have to be replaced each time ?

Thanks for any input.


p.s. don't want to use a standard oem cog Mark.

[Tom_]

http://tommisbillet.com/fi/tuotteet/...elin-pyoerae-2

or here

https://www.ebay.co.uk/itm/Audi-RS2-...-/162802302617

[Jonas_R]

That pulley from tommis billet is half a tooth out in timing. Just for your information.

The bolt is being stretched so it should be replaced.

You can get the bolt at Audi tradition

https://trshop.audi.com/konakart/AddToCartFromProdId.do?prodId=59099

[Error404]

Why not get one of Terrybullwon’s CrMo pieces? Cheaper and will ship to you I am sure

[hunker7]

Quattrocorner for both, the big bolt and 4 little bolts

[steve briance]

I got one of Terrybullwon's cro-mo pulleys a couple of weeks ago. It looks lovely and with all in one construction so no lose key to drop or worry about losing. I can't see what you get for the extra money on the Tommis item other than a brand name?

[macspring]

Thanks for replies and links.

Appreciated.

[s2dk]

Dont Think that the center bolt is a one user as i recall data says reuse

[terrybullwon]

Why not get one of Terrybullwon’s CrMo pieces? Cheaper and will ship to you I am sure

[macspring]

Terry, just seen your reply.

pm sent a few minutes ago also.

Thanks.

[sailaz]

The bolt is being stretched so it should be replaced.
You can get the bolt at Audi tradition
https://trshop.audi.com/konakart/Add...o?prodId=59099

just curious.. is there anyone who has experienced issue with this bolt >? seriously ..
in my understanding ( very little one ) if you put 'LockTite 242 this will be moooore then enough

[Jonas_R]

The issue is not loctite.

It is that the bolt is stretched and it should not be reused.

[_ShurikeN]

12.9 hardness grade M18 bolt stretched?

[Thuppu]

Could safely be used a couple of times. Been there done it.

Diesel bolt 200Nm + 270 degrees... <- thats insane... think about it.

[s2dk]

i did resure mine. put loctite on it and gave it hell.. data says what 450 nm on an aby??