Announcement

Collapse
No announcement yet.

Extra oil temp .. ABY engine

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Extra oil temp .. ABY engine

    Hi guys .. i want to put a oiltemp on the engine .. the thing is i hove no more places to use .. i wonder if there is picture where you can see all the points that are oil and you can use.?

    Thanks

  • #2
    Do you want sump temperature, temperature after oil pump, or....?

    Comment


    • #3
      i think the sump temperature would be good .. could change the sump nut to one with 1,8 npt outlet in centre.
      What is the original thread on the sump ?

      Comment


      • #4
        Originally posted by S2_avant 19930325 View Post
        i think the sump temperature would be good .. could change the sump nut to one with 1,8 npt outlet in centre.
        What is the original thread on the sump ?
        Here is what I did when I wanted a oil temp gauge in my maxxecu/Audi urs4.
        Bought a new oil sump plug from autoexperten, drilled and tapped the plug with the right threads for the temp sensor.
        605858f5ba8bf5e9.jpg
        https://www.s2forum.com/forum/member...project/page15

        Comment


        • #5
          Exactly what i did .. i just hope the thread is M26

          Comment


          • #6
            Exactly what i did .. hope the thread is M26

            Comment


            • #7
              Some easy 1 min search:
              http://www.maxxtuning.se/produkter/m...ten-eller-olja
              http://www.autokatalogen.se/afw/malm...odeIdNo=570492

              Comment


              • #8
                Easy search

                Sump plug all 5Cyl Audi threads: M 26 x 1,50
                Bosch M12 CLT temp sensor: M12x1.5mm

                Comment


                • #9
                  Nice work. What type of gauge are you guys connecting this to? Might do something similar.
                  Nothelle S2 Avant
                  Black Ur project
                  Ocianic Ur project gone
                  S2 Coupe project gone
                  Urs6 plus project gone

                  Comment


                  • #10
                    I used 1/8 NPT fitting , dont want to use M fitting , dont want the extra spacer.

                    When i try to upload a picture from photo album ... i get this ... SyntaxError: Unexpected token < in JSON at position 0”

                    Why

                    Comment


                    • #11
                      Connected to MaxxEcu for me, got all inputs/values on a tablet
                      https://www1.garaget.org/gallery/ima...85c6d956b5.jpg

                      Comment


                      • #12
                        Wow. Nice
                        Nothelle S2 Avant
                        Black Ur project
                        Ocianic Ur project gone
                        S2 Coupe project gone
                        Urs6 plus project gone

                        Comment


                        • #13
                          You do not have permission to view this gallery.
                          This gallery has 1 photos.

                          Comment

                          Working...
                          X