95.5 crank i 220mm engine

[mllen89]

Hi

Any one here have build stock engine with a diesel 95,5 crank?, i consider that with custom pistons an rods.

[newsh]

Known as a Ghetto Stroker I believe.
Try a search.
You have to grind a little out of the block to get clearance.

[mushasho!]

And keep rpm limit below 7500rpm max if rod length is 144mm.

[mac2226]

what your going to spend on forge internals you may as well go stroker. This is what I ended up doing.

[A80Avant]

I have one ready to go in within the next month after long delays. Planning to se the rev Limiter on 7k

Sent from my SM-N975F using Tapatalk

[mushasho!]

I have that setup... It works well...
Just need to find a good turbo that likes to stop partying at around 7500.