Idle valve info

[Error404]

Best solution is none of these. Use e-throttle

[S2_avant 19930325]

For sure , but price there after.
The idle pwm works , but for that car its not needed , it will will work with a solenoid. I need it for idle. Feels to much money to soend for idle. The ordinary throttle works fine.

[SSPRL]

Alex, I'm sorry, I'm stealing your ideas

[S2_avant 19930325]

With all necessary parts for it to work , what will the price end up to ?

[SSPRL]

Pedal box 20$
ibiza sensor 20$
throttle body 100$
Aluminium 20$
Adapters handmade
if you are talking about it

[Error404]

Alex, I'm sorry, I'm stealing your ideas

I don’t care if it’s for your own use
Besides, you didn’t make them quite as nice

FDDD092E-567E-4DED-A75C-419693D530A8.jpeg

[SSPRL]

looks very very compact . tell me it's not 68mm TB, otherwise I'll throw my adapter in the trash bin

[S2_avant 19930325]

I don’t care if it’s for your own use
Besides, you didn’t make them quite as nice

FDDD092E-567E-4DED-A75C-419693D530A8.jpeg

So if i want to go with the 68 mm throttle body ( how should i think choosing 68mm or 72mm ? ) is it horsepower related ?
What else do i need to make it work on my audi s2 avant ? Looked in your webshop.

If you use E-throttle you remove the need for IDLE solenoid .. correct ?

I use MAXXECU and original pedals.

[Error404]

looks very very compact . tell me it's not 68mm TB, otherwise I'll throw my adapter in the trash bin

It is 68mm throttle. It is used with silicone adapter to fit S2/RS2, throttle body is not clocked at an angle due to 2pcs adapter plate

[Error404]

So if i want to go with the 68 mm throttle body ( how should i think choosing 68mm or 72mm ? ) is it horsepower related ?
What else do i need to make it work on my audi s2 avant ? Looked in your webshop.

If you use E-throttle you remove the need for IDLE solenoid .. correct ?

I use MAXXECU and original pedals.

68mm is just fine, unless you make big changes to your intake also. We did 840hp on E85 with a 2.5 stroker and 68mm throttle so it’s pretty capable. You need to use TDi pedal box or wait a little while, we are working on a bolt-on adapter to use a B6/B7 e-pedal.
Yes idle solenoid is no longer used

Alex

[S2_avant 19930325]

Then i will wait. Let me know when it is done. Thanks for the part , water connector on the back of engine block. Great quality. Adonized to.

[Error404]

No problem
Thanks for your support

[S2_avant 19930325]

No problem
Thanks for your support

What is the status on the epedal ?

"68mm is just fine, unless you make big changes to your intake also. We did 840hp on E85 with a 2.5 stroker and 68mm throttle so it’s pretty capable. You need to use TDi pedal box or wait a little while, we are working on a bolt-on adapter to use a B6/B7 e-pedal.
Yes idle solenoid is no longer used"

Best Regards

[S2_avant 19930325]

What is the original inlet size on the throttle body on audi s2 ABY ?
Best Regards

[Rikki Kitto]

I'll measure mine later for you if no one pipes up