ID of the oring on steering pump

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • S2_avant 19930325
    S2Forum Maniac
    • Mar 2019
    • 648
    • Country: Sweden

    #1

    ID of the oring on steering pump

    What exact o-ring fits on the big flat cross bolt ?
    20210716_102000.jpg The other bolt / banjo bolt/on the pipe ,, is there any place to find it without a lot of shipping cost ?
    You do not have permission to view this gallery.
    This gallery has 1 photos.
  • aVL1D
    Banned
    • Sep 2016
    • 58
    • Country: Sweden

    #2
    Originally posted by S2_avant 19930325
    What exact o-ring fits on the big flat cross bolt ?
    20210716_102000.jpg The other bolt / banjo bolt/on the pipe ,, is there any place to find it without a lot of shipping cost ?
    Swe: Vilken sorts pump är det? Har du nått nummer på den? Jag har garanterat banjobulten.
    Eng: What typ of pump is it? You have any nr on it? I think i have that banjo bolt.
    Last edited by aVL1D; 16 July 2021, 22:53.

    Comment

    • mouse
      S2Forum Addict
      • Apr 2008
      • 374
      • Country: Australia

      #3
      Not sure of the o-ring size but I bought one with the plug from the this seller recently. (Not easy to find the plugs with o-rings)

      https://www.ebay.com.au/itm/13354444...0AAOSwkHxb6VQz

      Comment

      • S2_avant 19930325
        S2Forum Maniac
        • Mar 2019
        • 648
        • Country: Sweden

        #4
        Originally posted by aVL1D

        Swe: Vilken sorts pump är det? Har du nått nummer på den? Jag har garanterat banjobulten.
        Eng: What typ of pump is it? You have any nr on it? I think i have that banjo bolt.
        Its not a banjo bolt ,,, its a bolt with a small like 2mm hole on side and filter on the bottom on the bolt

        Comment

        • steve briance
          S2Forum Extremist
          • Aug 2014
          • 1455
          • Country: United Kingdom

          #5
          Filtered banjo bolts exist
          You do not have permission to view this gallery.
          This gallery has 1 photos.

          Comment

          • S2_avant 19930325
            S2Forum Maniac
            • Mar 2019
            • 648
            • Country: Sweden

            #6
            Yes , but i have not found a bolt like the one i have. The side hole on the bolt is only 1-2mm in diameter. I belive that is important so you have correct pressure on the steering.

            Comment

            • newsh
              S2Forum Obsessed
              • Aug 2003
              • 16226
              • Country: United Kingdom

              #7
              Yes it’s definitely a special bolt

              S2 Coupe 3B Project


              Ur quattro restoration

              S2 Avant

              Boost is the new rock and roll!
              sigpic

              Comment

              • nribs
                S2Forum Fanatic
                • Aug 2015
                • 91
                • Country: United States

                #8
                Originally posted by mouse
                Not sure of the o-ring size but I bought one with the plug from the this seller recently. (Not easy to find the plugs with o-rings)

                https://www.ebay.com.au/itm/13354444...0AAOSwkHxb6VQz
                Has anyone successfully ID'd the specs on just the o-ring? 24EUR is steep for the bolt and o-ring, especially because you can usually clean up the bolt seat enough that it won't create problems.

                Comment

                • S2_avant 19930325
                  S2Forum Maniac
                  • Mar 2019
                  • 648
                  • Country: Sweden

                  #9
                  I got to 2 original orings from the audi dealer ship.
                  Will check if they have the size.
                  The only 2 left her.

                  Comment

                  • aVL1D
                    Banned
                    • Sep 2016
                    • 58
                    • Country: Sweden

                    #10
                    Originally posted by S2_avant 19930325
                    What exact o-ring fits on the big flat cross bolt ?
                    17mm ID, 21mm OD, 2mm thick.


                    Comment

                    Working...