Announcement

Collapse
No announcement yet.

ID of the oring on steering pump

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • ID of the oring on steering pump

    What exact o-ring fits on the big flat cross bolt ?
    20210716_102000.jpg The other bolt / banjo bolt/on the pipe ,, is there any place to find it without a lot of shipping cost ?
    You do not have permission to view this gallery.
    This gallery has 1 photos.

  • #2
    Originally posted by S2_avant 19930325 View Post
    What exact o-ring fits on the big flat cross bolt ?
    20210716_102000.jpg The other bolt / banjo bolt/on the pipe ,, is there any place to find it without a lot of shipping cost ?
    Swe: Vilken sorts pump är det? Har du nått nummer på den? Jag har garanterat banjobulten.
    Eng: What typ of pump is it? You have any nr on it? I think i have that banjo bolt.
    Last edited by aVL1D; 17 July 2021, 00:53.

    Comment


    • #3
      Not sure of the o-ring size but I bought one with the plug from the this seller recently. (Not easy to find the plugs with o-rings)

      https://www.ebay.com.au/itm/13354444...0AAOSwkHxb6VQz

      Comment


      • #4
        Originally posted by aVL1D View Post

        Swe: Vilken sorts pump är det? Har du nått nummer på den? Jag har garanterat banjobulten.
        Eng: What typ of pump is it? You have any nr on it? I think i have that banjo bolt.
        Its not a banjo bolt ,,, its a bolt with a small like 2mm hole on side and filter on the bottom on the bolt

        Comment


        • #5
          Filtered banjo bolts exist
          You do not have permission to view this gallery.
          This gallery has 1 photos.

          Comment


          • #6
            Yes , but i have not found a bolt like the one i have. The side hole on the bolt is only 1-2mm in diameter. I belive that is important so you have correct pressure on the steering.

            Comment


            • #7
              Yes it’s definitely a special bolt

              S2 Coupe 3B Project


              Ur quattro restoration

              S2 Avant

              Boost is the new rock and roll!
              sigpic

              Comment


              • #8
                Originally posted by mouse View Post
                Not sure of the o-ring size but I bought one with the plug from the this seller recently. (Not easy to find the plugs with o-rings)

                https://www.ebay.com.au/itm/13354444...0AAOSwkHxb6VQz
                Has anyone successfully ID'd the specs on just the o-ring? 24EUR is steep for the bolt and o-ring, especially because you can usually clean up the bolt seat enough that it won't create problems.

                Comment


                • #9
                  I got to 2 original orings from the audi dealer ship.
                  Will check if they have the size.
                  The only 2 left her.

                  Comment


                  • #10
                    Originally posted by S2_avant 19930325 View Post
                    What exact o-ring fits on the big flat cross bolt ?
                    17mm ID, 21mm OD, 2mm thick.


                    Comment

                    Working...
                    X