Maximum power K24 7000

[K Simmonds]

Mine to have larger high flow ex wheel . New design compwheel . And even make new insert into comphousing .
not much more to do with these now !!!

Wow, that new K24 looks like a work of art! You've obvious put a lot of work into cramming those wheels into what looks like a stock K24 from the outside, what sort of power/torque is that unit capable of?

[vidar skotheim]

380++ real hp ..
depends engine setup

[K Simmonds]

380++ real hp ..
depends engine setup

That's really very impressive, opening up the turbine housing to take a 50mm exducer turbine/shaft which itself is considerably more modern in design than the old Porsche 944 or K24 7400 shaft is a really game changer.

Along with fitting what looks like as big a compressor wheel as possible that makes a very attractive package, especially for people who have to worry about parts being original in appearance.

[vidar skotheim]

Yes sold many of these . And seem most are very happy with spool and power

[K Simmonds]

Well it produces RS2+ spec power in a simple K24 7000 package which is awesome work..

I guess it depends a little on the spec of the engine, capacity, head work etc but in general on say a stock S2 engine when does it start to produce boost?

It's probably pretty dam good on a 10VT as well.

[Chris M]

My S2 achieved just over 300 with a modded K24 I built, slight cutback turbine and custom stock size billet wheel.

As people have said RS2 turbo is the best combo for response, power and torque.

[Chris M]

My S2 achieved just over 300 with a modded K24 I built, slight cutback turbine and custom stock size billet wheel.

As people have said RS2 turbo is the best combo for response, power and torque.

[vag_noob]

Yes sold many of these . And seem most are very happy with spool and power

Are chips available for k24 7000 URS4 upgrade on stock engine? What injectors are required, RS2 replica?

edit: forgot to say auto trans...

[vidar skotheim]

Not for auto trans