You can change the style the forum displays by selecting your preferred style at the bottom left of the site.
We have made an enhancement so that old threads should now link from search results to the correct thread. This is not yet in place for single post links
id say a set of aby or adu with standard timing wheels.
id say 7a with timing wheels and maybe 2 exhaust cams (7a) maybe the holy grail of standard cams. im going from my knowlegde of 16vt have and what can be had. in principle the same and is about lift and overlap as you know.
not sure what headwork you have jamo?
if you find some adjustable timing gear thats easy to buy let me know. im gonna do some testing of overlap this in summer.
what i can say is not 7a ex and aby inlet as they are. top end is great 5k plus. rest is a lot worse than aby.
Yeah, NMs for a mild tune, 7A for a higher tune. Running adjustable cam wheel and a versier would be best. Another option would be the old golf trick and run a & 7A or RS2 exhaust on the inlet.
Cheers'en, AndyC
1994 ABY Coupe - Projekt Alpinweiss
Errr...... watch this space
I'm getting a set of fully adjustable cams. Special delivery from Finland!
What would I do without Jyrki.... except have some money?
Javad: "this thing is neck snapping from 3800 to 7600rpm thanks the the stroker bottom end and the oversize 034 valves in the head, its torquey and powerful up top, the ultimate I5 track motor IMO."
I do own an audi 90 2.0 20V 160hp NM motor (the car did'nt moved for almost a year). My question is: Could i use both cams for my 3b s2 ? my aim its a mild tuned engine (350-400 hp)...
I'm sure this has been asked 1001 times. How do RS2 cams with the wheel fare on a k24?
I've got a 7A inlet to fit, going for some NA style tuning after seeing that's what Catcams do for their lower end turbo cams. Worked well on a BM and VW I've seen / built.
Cheers'en, AndyC
1994 ABY Coupe - Projekt Alpinweiss
I'm sure this has been asked 1001 times. How do RS2 cams with the wheel fare on a k24?
I've got a 7A inlet to fit, going for some NA style tuning after seeing that's what Catcams do for their lower end turbo cams. Worked well on a BM and VW I've seen / built.
I can not tell you, since I only installed the ADU cams when I installed my earlier RS2 turbo. Sorry
I've currently got the following pairs of cams in my possesion.
7A
AAN
RS2 (intake same as AAN)
When I've got the last of the generic chips to test for my comparison of 4 and finish the comparison write up I'll start playing with some cam configurations. Also be interesting to get the info on the NM cams with regards to lift and duration as that will give an indication whether it's worth getting hold of a set to test those too in the varying combinations.
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment