Reversed Intake Manifold

[sps-si]

i might be looking at it completly wrong but i don't see anyway it will fit with the power steering pump where it is
the pulley on mine comes up inline with the manafold. or is this just something for the 3b?

[Stick Insect]

Have a look at this inlet manifold from Hacke.

not on thread but you want one anyway!

http://200sx.kicks-***.net/miss_nism...c5047c603c.jpg

David

[sps-si]

Now that is what i call an inlet manafold!
one of them would do me nicly

[Floddy]

Hacke is one of the guys who has tilted the main rad for more room.

And about the power steering pump - it's the same on both 3B/ABY - and it fits. But I can't say there is much room left... On Tacq's old car the pump is in a very low postition with a bit shorter belt, and on mine the tightening mechanism is cut off.

The worse part is the clearance to the hood - that can get REALLY tight.

Some pictures, a bit dark but..

Mine:

http://www.irry.com/flod/DSCN0033.JPG

http://www.irry.com/flod/DSCN0034.JPG

Zaphod's:

http://www.irry.com/zap/DSCF0615.jpg

Tacq's old:

http://pr0nsessd.dyndns.org/irry/tacq/tacq_files/dscn1181.jpg

http://pr0nsessd.dyndns.org/irry/tacq/tacq_files/dscn1183.jpg

[zlobo]

here some more

http://zlobo.bounceme.net/zlobo/car/engin/DSC01676.JPG

http://zlobo.bounceme.net/zlobo/car/engin/DSC01678.JPG

http://zlobo.bounceme.net/zlobo/car/...s/DSC01654.JPG

[Greg_S]

I like the look of Zapods IM.

Who manufactured these for you?

[Floddy]

Zaphod's is made by RS Tuning, www.rstuning.nu.
A better look at that model:
http://www.irry.com/flod/rsinsug.jpg

Mine is made by Michael Furunäs, a bit more advanced on the inside, he makes several different models.
A better look at it:
http://www.irry.com/flod/IMG_9480.jpg
http://www.irry.com/flod/IMG_9481.jpg

Tacq's is a home-modifyed AAN manifold.

[s2avant]

How much do these cost roughly?

Ben

[Floddy]

How much do these cost roughly?

Ben

I don't know what RS tuning take, we got a special price since I know them. I'm pretty sure that they had the price on their homepage but now its's gone...

Furunäs has one model for 550eur, one for 770eur with some internal baffeling and better flow, and some specials for 1000+ euros for race use with separate chambers and cones(?) and stuff. All prices is plus an original manifold to trade in.

[91_S2]

Zaphod's is made by RS Tuning, www.rstuning.nu.
A better look at that model:
http://www.irry.com/flod/rsinsug.jpg

Mine is made by Michael Furunäs, a bit more advanced on the inside, he makes several different models.
A better look at it:
http://www.irry.com/flod/IMG_9480.jpg
http://www.irry.com/flod/IMG_9481.jpg

Tacq's is a home-modifyed AAN manifold.

Floddy,

Nice stuff. Did you guys move the MAF to between the IC and the throttle body or is it still on the other side? Or are you running speed-density?

[Floddy]

Floddy,

Nice stuff. Did you guys move the MAF to between the IC and the throttle body or is it still on the other side? Or are you running speed-density?

The MAF is still on the inlet side of the turbo. Zaphod is going to have it this way, but I'm going to remove it, jump on it and drive over it a few times next year when i get my Haltech into place.

[Greg_S]

Floddy on the Furunäs what do you have to do to the IM to get it to fit the car? are there any extra pipes etc you need to add, holes to drill etc to fit it?

thanks

Greg

[Stick Insect]

just seen this self build reversed inlet manifold.
http://www.carpassion.com/en/forum/v...ic.php?p=18016.
ChrisM posted the link to the car in another section.


The translation engine has made a right **** up of the translation!

It has come out as : self-'s building suck in-bend with shortened sucking in way NEW

David

[Beetie]

You've not been searching for them websites again have you David? I thought you'd had councelling for that?

It has come out as : self-'s building suck in-bend with shortened sucking in way NEW

David

[Stick Insect]

You've not been searching for them websites again have you David? I thought you'd had councelling for that?

ChrisM found it , not me!

David