Hi all.
Just registered tonight, must say you have a wonderful website.
There's not much difference between S2's & RS2's in many systems, perhaps someone out there could help or advise about a few problems I am having.
I have noticed that my engine fan does not "run-on" after switching off the ignition, even when the engine is hot enough for the fan to be running when the engine is on. I spotted that there was no fuse in position 5 in the fusebox, but there was no change even when I fitted one. What should I check first ?. Should the fan run-on, my old 90Q Sport 20v did.....
I have noticed that sometimes the engine feels a little lethargic, as if the turbo is a bit lazy. No other symptoms other than a little under the weather. Usually the turbo spools up around 3000rpm, just sometimes it does not want to know untill 4000 ish... a bit annoying, makes me vulnerable to Boxters...
Hope someone out there recognises these problems, any help would be much appreciated...
Thanks
PAUL
RHD RS2 in Nagaro Blue, Guildford Area...
Just registered tonight, must say you have a wonderful website.
There's not much difference between S2's & RS2's in many systems, perhaps someone out there could help or advise about a few problems I am having.
I have noticed that my engine fan does not "run-on" after switching off the ignition, even when the engine is hot enough for the fan to be running when the engine is on. I spotted that there was no fuse in position 5 in the fusebox, but there was no change even when I fitted one. What should I check first ?. Should the fan run-on, my old 90Q Sport 20v did.....
I have noticed that sometimes the engine feels a little lethargic, as if the turbo is a bit lazy. No other symptoms other than a little under the weather. Usually the turbo spools up around 3000rpm, just sometimes it does not want to know untill 4000 ish... a bit annoying, makes me vulnerable to Boxters...
Hope someone out there recognises these problems, any help would be much appreciated...
Thanks
PAUL
RHD RS2 in Nagaro Blue, Guildford Area...


Comment