urs4 big turbo starting issues....

[Jamo]

Whoa a big thing pops out, you've got the 3rd trigger on the camshaft enabled!!

[Jamo]

Theres a tick box for validate config a few errors are in there, i have to pop out i'll correct and you can try the config again

[dkw_dude]

Fuel map looks very flat, all cells are between 90 and 105

[Jamo]

i agree but don't know spec of turbo and inectors etc plus Marc can supply better values.

try that, all i've done is removed all the errors except one which doesn't matter

[euro_urs4]

i agree but don't know spec of turbo and inectors etc plus Marc can supply better values.

try that, all i've done is removed all the errors except one which doesn't matter

ok great i will give it a shot tom, thank you, and how to i upload this map back into vems? (sorry newbie with vems)

and that third trigger being enabled could that be the problem for causing a non start

[Jamo]

Defininatly could be a cause as the ecu wouldn't be using the 3 triggers like described earlier in this thread.

[euro_urs4]

Defininatly could be a cause as the ecu wouldn't be using the 3 triggers like described earlier in this thread.

Awesome can't wait to try it thanks and i'f someone can direct me how to upload it correctly onto my ecu

[Billman]

connect your laptop to you ca rjust like when you downloaded your config. Go File->open config select the file and then choose upload config.

[euro_urs4]

connect your laptop to you ca rjust like when you downloaded your config. Go File->open config select the file and then choose upload config.

Perfect figured it was simple just wanted to make sure thank you will keep you guys posted later tonight

[dkw_dude]

http://www.vems.co.uk/forum/ Lots of stuff here

[euro_urs4]

no luck with the new config :/, Marc Swanson checked a cranking log i did for him and says the flywheel pin isn't the problem , more trouble shooting to come now, any ideas guys

[Billman]

Does your ECU has the hall inverter built in or as an adapter cable?

[Jamo]

Let Marc do his magic I say

[euro_urs4]

Let Marc do his magic I say

Yeah my brains outta ideas appreciate the help Guys gonna take the car to Marc this weekend and I'll keep you posted

[euro_urs4]

Audi finally got started, wasn't a tune issue like one of the guys here mentioned to check the lines going to the regular, which i completely forgot to check that day and it ending up being the problems i had the lines going the wrong way, thanks to Marc solving the problem car now runs will go and pick it up Tom, just wanted to thank you guys for all the help trying to diagnosing the car ( coulnt do it without you all) always knew it was something stupid :/