Holset HX35 - Flow Chart

[Nuno Cristiano]

Hi friends,

Anyone have Flow Chart of Holset HX35?

Regards

[Billman]

It depends on the compressor impeller. There are many options from 54/77mm to 56/82 or even the HX35/40hybrids with 60/85mm.

-NOT ALL THE MAPS HAVE THE SAME SCALE (some in kg/sec other with lbs) Check it out before comparing numbers-

here some of these maps:

[caterpillar]

http://forum.savarturbo.se/viewtopic.php?f=11&t=60925 sorry for posting from another forum, and its swedish langue too....

[quattro84]

It's an awesome forum to read though, nice solutions can be found to have your own 'budget bygge' project

[Nuno Cristiano]

It depends on the compressor impeller. There are many options from 54/77mm to 56/82 or even the HX35/40hybrids with 60/85mm.

-NOT ALL THE MAPS HAVE THE SAME SCALE (some in kg/sec other with lbs) Check it out before comparing numbers-

here some of these maps:

Hi ,

Very nice!

Thank you!

[ian4455]

Any part numbers for these HX35's, lots of different specs 56/84 with Billet Compressor Wheel for example ?

Also what size Volute Hotside would we be talking about as typical HX35 have No.12 divided.

Injectors 660 cc ?

Any further info on set-up required to run a HX35 anyone?

[Thuppu]

Usually the HX35 Super has a #8 size single entry T3 housing.

[Nuno Cristiano]

I´m looking some turbos from market.

Garrett, Holset, Switzer, IHI...

I have exaust Manifold 034 Motorsport with T3 Flange.

If i remember well HX40W use internal wastgate and T4 Flange. Not good for me.

So, i know Garrett GTX3076R have very good characteristics but not use internal wastgate.

I´m looking turbo to do around 50~60lb/min.

Injectors are 80lb/min @ 3bar.

[rst]

I would suggest Holset HX35 Super.
Here is compressor map for it:

http://www.turbotekniikka.fi/images/stories/superhx35_2.jpg

It spools also nicely on 2.2T.

Here is one place from where you can buy it. -> KKD Motorsport

http://www.kkdmotorsport.com/kauppa.php?k=1270835105

[Nuno Cristiano]

I would suggest Holset HX35 Super.
Here is compressor map for it:

http://www.turbotekniikka.fi/images/stories/superhx35_2.jpg

It spools also nicely on 2.2T.

Here is one place from where you can buy it. -> KKD Motorsport
http://www.kkdmotorsport.com/kauppa.php?k=1270835105

My engine is 7A. It´s better spool.

Holset turbo of KKD is 100% original?

[rst]

As far as i know yes, all turbos that are sold via KKD are 100% original.
The best way to got all the info you want is (warranty/shipping costs/etc), just send an email to info@kkdmotorsport.com.
Myself and some of my friends have bought turbos from there and we have never had any problems with them.

[Nuno Cristiano]

E-mail sent!

Regards.

[ian4455]

Any idea of cost of hotside for the HX35 Super, also what size injectors required ?

[Nuno Cristiano]

Any idea of cost of hotside for the HX35 Super, also what size injectors required ?

80lb/min are good option (IDC=85%) to 60lb/min of HX35W..

[Billman]

I don't think the HX35 super with the 54/77 compressor impeller will do 60 lbs. Most people claim that the Super40 compressor witch is 60/86mm is making 60 lbs/min. Both wheels seem to have the same design so one or the other statement is not true.I also believe that this "Super35" turbo is really a HX30 or HE351CW hybrid of some sort since I have never seen any other HX35 turbo with so small turbine impeller. All the HX35 I have seen till now is 70/60mm and not 65/55.

about the hotside numbers there is this list in the net but i cant confirm that it is true:

6 cm2 = 0.41 A/R
7 cm2 = 0.49 A/R
8 cm2 = 0.57 A/R
9 cm2 = 0.65 A/R
10 cm2 = 0.73 A/R
11 cm2 = 0.81 A/R
12 cm2 = 0.89 A/R
14 cm2 = 0.97 A/R
15 cm2 = 1.05 A/R
16 cm2 = 1.13 A/R
17 cm2 = 1.29 A/R
19 cm2 = 1.37 A/R
20 cm2 = 1.45 A/R
21 cm2 = 1.53 A/R
22 cm2 = 1.61 A/R