billet wheels on rs2 turbos...

[dobbin]

rs2 turbo

I have just ordered a billet upgrade from hoffer for my rs2 turbo and he's quoting
420 to 425 bhp and he does k26\27 billet as well

[Rusty]

Is he back in the UK? Last time I spoke to him, he hadn't found a billet RS2 upgrade, just a stock comp wheel, as Lloyd ran for just under 400bhp.

[Christophski]

Andy, what else had Lloyd done apart from turbo and suitable map to reach that power? Do you know?

[Rocco]

Hank,these billet wheels are same material and design than the gtx Garrett versions?

[Wrath]

Dobbin: how do you get hold of Hoffer? Tried to contact him for 1,5 year now with no luck...
Only got The PM solution ... Mail? Number?

Also, any price on that Billet wheel you got?

[Tonks4x4]

I have no idea if these are any good but spotted them on German eBay. Might be worth a go.

Look at this on eBay:

Turbolader Upgrade Verdichterrad für Audi 80 RS 2 Turbo Quattro 53249887200

http://bit.ly/1bFU6J4

Tonks4x4 - The Land Rover Specialist

[Rusty]

AFAIK, Lloyd's car was otherwise stock, although I can't remember about the injectors.

[dobbin]

billet rs2 upgrade

spoke to hoffer yesterday he is now living in Portugal but still can do turbos.
he hasn't got any billet rs2 wheels in stock, new batch on there way to him
so as soon as I know more I will post here and cost

[Rusty]

I'd be most interested to compare the various options including the k26 billet. Just want reliable, use able power.

[PRY4SNO]

Anybody get one of these beauties on the dyno?

[dobbin]

rs2 hybrid

update I have fitted a billet wheel to my rs2 supplied and rebuilt by cr turbos.
std inducer size rs2. 47mm ex tip 66mm
billet wheel 50.75 ex tip 75.14 7 blade wheel
overall size 5mm bigger, I could have gone with a bigger wheel to 8mm but
cr turbos suggested 420 bhp with 5mm wheel and 440 450 with 8mm wheel.
im running stock internals and was only looking to upgrade over stk rs2 turbo.
spoke to mrc tuning who said to use 630cc injectors .
so this is why I cant make adi this year as mrc are mapping car on 13/10/14
so when I get rolling road print out will post results

[Mcstiff]

Slightly OT but here's the new K26 (#6) billet record holder (E85)

[gc77]

update I have fitted a billet wheel to my rs2 supplied and rebuilt by cr turbos.
std inducer size rs2. 47mm ex tip 66mm
billet wheel 50.75 ex tip 75.14 7 blade wheel
overall size 5mm bigger, I could have gone with a bigger wheel to 8mm but
cr turbos suggested 420 bhp with 5mm wheel and 440 450 with 8mm wheel.
im running stock internals and was only looking to upgrade over stk rs2 turbo.
spoke to mrc tuning who said to use 630cc injectors .
so this is why I cant make adi this year as mrc are mapping car on 13/10/14
so when I get rolling road print out will post results

Any news on the mapping session.
Gary.

[Rusty]

[Tonks4x4]

Had my billet Iroz turbo mapped in Feb 2014 but only on stock RS2 injectors. Have run it for several months and around the track this weekend!!! Love it.

Currently running 347 crank HP

My RS2 injectors are however maxed out so have just purchased some larger ones and Water meth injection.

When this is all mapped and dyno'd I will report back.