400 Hp

[pasbogdan]

Thanks for the addition jo. As my point was on my original post to compare apples with apples.

Also in practice most people running high boost usually keep it to high revs anyway. .

Not always,and if done,the budget permits rebuild after each race.
Maybe we should think on factors that get to bore/rings wear.
-Heat
-Lubrication(honing patterns,ring composition for keeping oil on faces for lubrication)
-Number of cycles that rings pass a full stroke on the bores(rpm)
-Expanding gases pushing rings to bores.Some rings are designed to be pushed to bore and seal by their own spring force and less by expanding burning gases and some more by expanding gases and less by spring.And now we start thinking what rings do we use?Or the answer is simple:"good ones:wiseco,je,wosner, etc etc).
Now:What factors grow up together with boost?And in what percentage they lead to wear?
I just think with loud voice(in fact write) for my own documentation.Not wanting to prove anything to anyone.Just for my own knowledge.

[Costash]

Enlighten us Sir.If you start digging sh ..t go all the way.

[pasbogdan]

Enlighten us Sir.If you start digging sh ..t go all the way.

No need to call me Sir...

[A80Avant]

Enlighten us Sir.If you start digging sh ..t go all the way.

You don't need to know what I know. My conclusions are my own. You have your own experience and value it. Stick with it. I'm not here to smother anyone's reputation or gossip. Each of us create an image of what we represent, what our motives are and where we are going with them.

I'd like to believe that every1 has the ability to form their own opinions about people.

And since this going way off topic, let the OP to back to his question

[rs2coupe]

OT, but you two guys are the best ! The exchange of banter is healthy, once it doesn't go over the cliff.

I'm just sorry we can't all do a group skype on here. We'd all have a great time, just like being in the pub with your mates having a beer and a healthy exchange of views.

As it is, my visual imagination is working overtime.

As long as there is no lasting impact from such a strong exchange of views, then "no harm done", apart from some possible damage to the hammer and tongs, and no I'm not tempted to now start a separate thread asking what size turbo to use on my S2.

Kind regards and best wishes to all.

what he said ^^

make boost not war stop it!!

[DNA-S2]

well this thread was intresting read
bit of everything .... lol

[macspring]

well this thread was intresting read
bit of everything .... lol

I do my best !

[DNA-S2]

I do my best !

Any idea on my clutch upgrade question
and what fuel set up would you be running?
On my wall for info

[dmacdou1]

well this thread was intresting read
bit of everything .... lol

It was indeed, at least the small parts of it I could understand at least

[kelys]

Thanks for many answers. Now i think, what i maybe want to do. But i am not quite sure

Kenneth