My cold air intake
Announcement
Collapse
No announcement yet.
Moving the MAF anybody did this?
Collapse
X
-
-
-------------Attached Files
Comment
-
Originally posted by RIXhej jonas
trottlebody is gasspjæld in danish,
if you move it,and get a real blow off,you could just throw the intake hose away,and bolt the filter direktly on to the turbo,i will also safe up for the HKS filter,and bolt it on to the turbo.
Regards
RIX
/Jonas R.
Comment
-
Originally posted by SøernS2-------------
/Jonas R.
Comment
-
Originally posted by Jonas_RLike the heatshield, but i guess your MAF is still in the same place as normal right? So i guess you have no problems running with the MAF like that?
/Jonas R.
Regards
RIX
Comment
-
These are old pix.
I have the MAF 2 feet from the trottleboby on the pressure side.
Ill post new pix soon...
Søren S2
Comment
-
Maf to Hot side
Originally posted by SøernS2These are old pix.
I have the MAF 2 feet from the trottleboby on the pressure side.
Ill post new pix soon...
Søren S2
In an Ideal world I want to bolt a filter directly onto the Turbo so
1. Filter faces in the right direction
2. A larger filter can be accomodated
3. Create space fore HID kits in the future
To achieve this I think I will need to move the MAF to the hot side but need a picture to know where best, I do understand that a re-map will be needed but currently I am running standard and need a power map anyway.
.91 S2 3B in Pearl, Miltek, De-Cat pipes, Short Shifter, 996 Monoblocks + 323 A8 Discs, Whiteline R-ARB:MRC Generic 3B Chips
.
Comment
-
Comment
-
Mine is hereAttached Files
Comment
Comment