Moving the MAF anybody did this?

**sorens2** · 19 January 2005, 19:09

My cold air intake

Attached Files

Powerblanket 3.jpg (88.0 KB, 171 views)

**sorens2** · 19 January 2005, 19:11

-------------

Attached Files

Powerblanket.JPG (93.7 KB, 166 views)

**Jonas_R** · 19 January 2005, 19:50

Originally posted by RIX

hej jonas
trottlebody is gasspjÃ¦ld in danish,

if you move it,and get a real blow off,you could just throw the intake hose away,and bolt the filter direktly on to the turbo,i will also safe up for the HKS filter,and bolt it on to the turbo.
Regards
RIX

Yeah but it kinda sucks using money for remap, BOV

not money i quite have, but perhaps i will try to save up some money for this.

/Jonas R.

**Jonas_R** · 19 January 2005, 19:52

Originally posted by SÃ¸ernS2

-------------

Like the heatshield, but i guess your MAF is still in the same place as normal right? So i guess you have no problems running with the MAF like that?

/Jonas R.

**porkkis** · 19 January 2005, 20:34

Well that's what I call a cold intake!

**RIX** · 19 January 2005, 21:03

Originally posted by Jonas_R

Like the heatshield, but i guess your MAF is still in the same place as normal right? So i guess you have no problems running with the MAF like that?

/Jonas R.

his pictures are old,the last tiÂ´me i saw it he had a 90 bend down,as fare as i know he has put it on the pipe on the right.

Regards
RIX

**sorens2** · 19 January 2005, 22:36

These are old pix.
I have the MAF 2 feet from the trottleboby on the pressure side.
Ill post new pix soon...

SÃ¸ren S2

**GeorgeS2UK** · 7 April 2005, 11:52

Maf to Hot side

Originally posted by SÃ¸ernS2

These are old pix.
I have the MAF 2 feet from the trottleboby on the pressure side.
Ill post new pix soon...

SÃ¸ren S2

Looking for Info on this topic and where possible a picture (Soren S2)

In an Ideal world I want to bolt a filter directly onto the Turbo so

1. Filter faces in the right direction
2. A larger filter can be accomodated
3. Create space fore HID kits in the future

To achieve this I think I will need to move the MAF to the hot side but need a picture to know where best, I do understand that a re-map will be needed but currently I am running standard and need a power map anyway.
.