RS2+ spec

[quattrostyle]

Regarding the weight of the car, i'm curious to know what it actually weighs with a 20VT in it. My 90 quattro weighs 1210 kg. with only a couple litres of fuel in it, stock 2.2 engine but with ABS and catalyst.

[Colesy]

As above a good remap/chip set using the stock hardware will get you to 280BHP and be pretty dam quick in a 1200kg car. My S2 is a little over 1300kg's running full RS2 spec, so 350BHP ish and it's more than fast enough for day to day road use.

I am in a similar position, running full RS2 spec and the car is very fast, probably fast enough I just keep getting the question pop into my head, "I wonder how fast 450 would be?"...

[Rikki Kitto]

Regarding headwork JP is your man JNL racing

[Error404]

Regarding the weight of the car, i'm curious to know what it actually weighs with a 20VT in it. My 90 quattro weighs 1210 kg. with only a couple litres of fuel in it, stock 2.2 engine but with ABS and catalyst.

Not sure about the 10v, but the ABY set-up doesn't weight much more than 7A for exampe - the only additional weight really is turbo, intercooler and oil cooler, plus DM flywheel adds a few Kg if you run it = around 18-20Kg, not a huge extra.

[DJones]

I am in a similar position, running full RS2 spec and the car is very fast, probably fast enough I just keep getting the question pop into my head, "I wonder how fast 450 would be?"...

Bloody quick.... Ask AndyP what 490 feels like in a 1268kg car....

[Error404]

It permanently altered his face

[Bowie69]

Recent pic:

[Cottis]

If you are asking yourself the question and do not use the car as an everyday driver, I think you are left with little choice but to find out for real.

Not sure what it will be but the next fun car I have will either have to be more powerful than the last or a s8!tload lighter, preferably both.

[Error404]

This is Mr P's face now

[Pauliusb2]

Lol yes simmilar

[Hoyle]

Sounds like it's going to be ABY with a chip then!

What's the ideal exhaust size for this setup? 2.5"? 2.75"?

Will a standard URQ clutch hold up ok with this or should I consider an alternative?

Would an RS2 EM make much difference on an otherwise pretty standard ABY?

Would there be much point in installing a 7A exhaust cam whilst I'm at it?

Thanks for the replies so far chaps!

[Pauliusb2]

I use genuine sachs clutch and its fine never slipped and i use 2.5" exhaust with s2 middle box and urq rear box sounds amazing

[quattrostyle]

If you have a RS2 EM or can get one cheap then fit it