Bosch f5dp0r still failing?

**s2dk** · 16 August 2016, 12:57

I have done it before? Both on tfsi and my old golf4 gti with 320 hp

**hunker7** · 16 August 2016, 12:59

You're not meant to gap iridium plugs as far as I know, it even says that on a package too.

**s2dk** · 16 August 2016, 13:16

I know ☺ but you can
Hehe
Think stock is 0.6?

**hunker7** · 16 August 2016, 13:19

Your car your choice.

I think recommended is 0.6mm yes.

**RichLV** · 16 August 2016, 13:38

BKR*EIX's are 0.8mm gap. AFAIK, TFSI coils love bigger gap, approx 0.9-1.1. Correct me if I'm wrong.

**Error404** · 16 August 2016, 14:28

Well they are supposed to be 0.7mm
Out of my set of 5 I had one a .90 and two at over 1.00!

**s2dk** · 16 August 2016, 14:39

Yah thats bad
Btw error think im gonna need a tfsi kit soon ☺

**Error404** · 16 August 2016, 15:46

No problem my friend, let me know when you are ready

**quattro-nick** · 16 August 2016, 16:06

no trouble with the bosch here for my 560hp engine

**Wrath** · 16 August 2016, 16:48

NGK for the win, don´t know any Swede that uses bosch plugs... from stock power to 1000+ hp

**newsh** · 16 August 2016, 21:43

Jonus recommends plain copper plugs.

**s2dk** · 17 August 2016, 05:48

Gabbed the new ones bkr7e to 0.6 and it runs
Got 5 for same price of 1 7eix ☺

**V6quattro** · 17 August 2016, 05:57

I'm also running bkr8e-11 on 0,6mm

**s2dk** · 17 August 2016, 06:03

Allso found out that the ground wire on the coil aide had fallen off
The big brown one running to rocker cover bolt ?

**chris** · 17 August 2016, 20:22

plugs

denso worked for me on my rs2 and urs4 and now my ur s4 v8

Comment