Hello, I'm preparing to give my car an upgrade. I am currently running AET turbo 390hp 1.9 bar on Wa\gner kkk flange and would like to know if there is an upgrade available that I can fit without losing the oem look and fit. Cheers!
-
-
Wagner or replica on eBay
-
Hello I already have a Wagner EVO manifold (KKK) on it and would like to know what turbo upgrade I can achieve above what I have already fitted (aet 380+hp turbo) whilst keeping the ex manifold I already haveComment
-
KKK26/27 with a No8 hotside will yield 430-450 and looks OE. Small spacer is required on the oil inlet to clear the coldside housing and a modified maf to turbo hose. Bullet proof technology, if not a little long in the tooth. KKK26/27/29 if you're looking for more top end and lag. All the modern turbos will fit if you can get them paired up with the K26 hotside, or look for a k26 to T3/4 conversion plate and take your pick of what's out there. Turbo Dynamics make a nice hybrid, but it's not cheap
91 Modded 3B
14 A6 Avant Black EditionComment
-
Nice one for that, cheersComment
-
Or you could look at rs2 billet turbo that should push over 400Comment
-
Do you mean rework my own turbo? How much can a billet rebuild give in extra power/spool? Thanks.Comment
-
Is that aet turbo and rs2 unit?
If yes i Guess you could upgrade it with billet wheel.
There is a big thread on rs2 billet if you do a searchComment
-
Hello, it is an RS2 unit as far as I know, I will have a read, nice one for that, thank you.Comment
-
Is there someone who has a stock of these in the uk?Comment
-
Comment
-
I think I will be getting on the phone, thanks for the pointers.Comment
-
I have a GT3076 on that exhaust manifoild. 453 on the hubs with original look and airbox
Audi Rs2
Audi A3 Sportback
Ducati 1098RComment
Comment