door seal wanted // end of production

[veneto rs2]

In my hand 8G0 part, on my S2 Coupe ABY door 895 part



In my hand 895 part and on my Cabriolet door 8G0 part



For now I don't know if is really possible exchange 895 Coupe door seals with 8G0 Cabriolet door seals and the opposite, this evening or tomorrow I will try it.

I'm glad to know after months that I was right on the Cabriolet/Coupè seals compatibility because on this picture posted from Alessio three out of 7 seals are Cabriolet parts.... and one (third from left bottom) it's the Coupe part.

Or I'm I wrong?

[audivwfan]

Thanks Alessio, I can't wait to get these put on.

Ted

[Nuvo]

I'm glad to know after months that I was right on the Cabriolet/Coupè seals compatibility because on this picture posted from Alessio three out of 7 seals are Cabriolet parts.... and one (third from left bottom) it's the Coupe part.
Or I'm I wrong?

Yes I agree, I count three Cabriolet parts too. Alessio do you have enough Coupe seals for everyone or are you intending on sending Cabriolet seals too?

[AudiCoupeParts]

Yes I agree, I count three Cabriolet parts too. Alessio do you have enough Coupe seals for everyone or are you intending on sending Cabriolet seals too?

I have BOUGHT and tested Cabriolet seals on my COUPE doors.....

CABRIOLET SEALS DO NOT WORK!!!! THEY DO NOT WORK ON A COUPE/S2 door card.


I BEST NOT BE GETTING ANY CABRIOLET SEALS.

[Nuvo]

I have BOUGHT and tested Cabriolet seals on my COUPE doors.....

CABRIOLET SEALS DO NOT WORK!!!! THEY DO NOT WORK ON A COUPE/S2 door card.


I BEST NOT BE GETTING ANY CABRIOLET SEALS.

You have just confirmed what I suspected.

[AudiCoupeParts]

THis GB is going to get ugly.

You have just confirmed what I suspected.

I had a bad feeling about all this crap. I thought this was some "special production" of these seals? What a freaking waste of MONEY.

[HPmuirt]

Umm, glad I ordered Coupe parts from Alessio as I too would hate to receive Cabbie parts if they do not fit! (hint hint)

Cheers n

Si

[Le S2 Audi]

Yesterday I was regretting not joining in on this GB...

But now I am glad that I gave it a miss!!

[rs2coupe]

Umm, glad I ordered Coupe parts from Alessio as I too would hate to receive Cabbie parts if they do not fit! (hint hint)

Cheers n

Si

Ummm double hint hint I requested 2 sets of Coupe specific seals

[Nuvo]

We ALL did!

[Audi-Porsche Avant RS2]

Hello, I confirm to all that Cabriolet and Coupe door seal are different and not compatible, I had already write this before and the picture of mine Cabriolet with Coupe door seal and the picture with mine S2 Coupe with Cabriolet door seal are for confirm this, so don't worry that you must receive COUPE DOOR SEAL FOR COUPE, NOT CABRIOLET DOOR SEAL FOR COUPE!

Alessio

[Audi-Porsche Avant RS2]

In the picture there are 4 coupe door seal and 3 cabriolet door seal!

Alessio

[Audi-Porsche Avant RS2]

I don't understand why Stefano, Veneto RS2 for private questions between us always wants to make me look bad, but in the end what he managed to procure these seals is me, not him.

Alessio

[bikerjim]

Come on guys give the guy a break, i remember in one of alessio's previous posts/threads he mentioned he got a cabriolet and im sure these seals are for this.

If i was still in this GB then i would be keeping my mouth closed about right and wrong parts till i received them. If they were wrong obviously i would not be pleased and something would have to be sorted out. But if they were right, i would be very happy and great full with the great work Alessio has done and the effort to source NLA parts from another country and send them over here.

[Audi-Porsche Avant RS2]

Thanks, please, I wait confirm of adress where send the package bikerjim, I have send you some pm and emails, have you receive these or not?
Thanks!
Alessio