RS2 / Avant Aero Wiper Part List

[M_GORDON]

Skull, your kit from an A6 is good but I preffer like the RHD from the first post.

[Lloyd]

Part numbers quoted in the original post are for RHD. No cutting of blades are required as they are a perfect fit.

[sailaz]

Then again... would be nice:

Any photos of the front and rear to see "in the flesh" how they sit. Kind regards.

[Christophski]

I have to thank you Lloyd for this post.

I have had my Avant for nearly 4 years and it has aero wipers fitted all round by the previous owner. It took me about a year and a half to get the rear wiper to work and up until I found this thread to get the rear wiper bade. I got it and fitted it last night and so for the first time in almost 4 years i can clearly see out of the rear window. Its like christmas has come early for me. (Simple/ cheap things please me)

[Error404]

anyone tried to fit aero wiper arms off the latest generation A3?
I was looking at them in a carpark the other day, I wondered if they would work, they are a similar shape to the ones Rok has on his Compi, but the A3 screen is smaller, more like ours

[waveydavey]

Just popped into my local TPS to enquire about the prices for upgrading to aero wipers for the front and rear of my Avant.

I asked for the following
Front
2 x 6X2 955 409C
2 x caps for the above
2 x 1J2 955 426B
Rear
1 x 6Q6 955 707
1 x 7M3 955 435 01C
1 x 7EO 955 425

The whole lot came to £170 trade or £190 retail with the Lupo GTI arms being 45 quid each trade

Think I'll be looking out for cheap secondhand arms on ebay then.

Cheers

David

[newsh]

Bump

[sailaz]

Part numbers quoted in the original post are for RHD. No cutting of blades are required as they are a perfect fit.

yes, looking at the measurements looks perfect

- DRIVER SIDE WIPER BLADE LENGTH 530MM
- PASSENGER SIDE WIPER BLADE LENGTH 475MM
- PART FITS ONLY RHD MODELS

so logically thinking the whole set should be perfect fit for LHD

or maybe somebody has already found a solution for a LHD passengers side with a Audi blades/arms kit 4B1998401 which has, I believe, both blades 550MM

... another solution is to go for aftermarket blades, like HEYNER via adapters