RS2 intake vacuum fitting part number

[carboRS2]

The original part on the RS2 inlet manifold is M8 so maybe the 034 145 779 D might work. The WGFV hose is a larger diameter hose I think. I'll have a look tonight.

I've had my eye on part# 034 133 578 C, which I will order and then see.

I've already tried 034 133 382 T, which turned out to be the connection on the inlet for the ISV.

034 145 779 D is the one that seems to be the right one looking to etka.
I've been to my dealer today and he said there's still stock in germany so I have ordered one.

I'll let you know if that's the right one or not

[carboRS2]

Confirmed!
034 145 779 D is the right part. I've asked directly to Audi Tradition in Germany and this is what they said:

Good morning!

That´s correct part, yes! And it is still available at your local Audi dealer.



Mit freundlichen Gruessen // Best Regards

Sebastian Funk
Audi Tradition Neckarsulm

[saltinot]

I hate to burst your bubble, but 034 145 779 D is the vacuum fitting on the cold side of the turbo that connects it to the WGFV. It is not the correct size unfortunately. However, please post back when your part arrives to descibe what you have.

[carboRS2]

I hate to burst your bubble, but 034 145 779 D is the vacuum fitting on the cold side of the turbo that connects it to the WGFV. It is not the correct size unfortunately. However, please post back when your part arrives to descibe what you have.

Come on... Really? I have the car parked waiting to find this f****g part
Anyway, let's what arrives. I'll post pictures as soon as it gets here.

[veneto rs2]

I hate to burst your bubble, but 034 145 779 D is the vacuum fitting on the cold side of the turbo that connects it to the WGFV. It is not the correct size unfortunately. However, please post back when your part arrives to descibe what you have.

Stupid question probably...
Does the AAN have the same part fitted somewhere?

If yes I have a complete AAN sitting in my grotto I can take the ****** out from it and send it to Giorgia easily...

Stefano

[saltinot]

Thanks for the offer but unfortunately the AAN motor does not share this fitting.

[saltinot]

I missed these

Tom remind me before le mans. I'll take one with me for you.

That would be great Mike. Let me know what you want for it.

Tom I have some contact for a firm in Denmark that sells all kinds fittings for cars.

I'm sure he has something, I could ship it with the other parts if you like?

But just to clarify, it needs to be M8 thread? and then what size hose does it need to fit?

Jonas, yes it is M8 to 3.5 ID vacuum line(I think).

So the thread size is M8? I'm almost sure we got some here in our local shop, I can ask alround. Fitted this to my Comp, threadsize it 1/8NPT though...

M8 is the size. Please post your findings here.

Thank you for looking into possible solutions!

[Ruffiano]

isn't the 3b manifold one the same? i have one i could get you, stateside too!

[Error404]

job done

http://www.malpasonline.co.uk/ItemDe...okiesEnabled=1

[Ruffiano]

... just looking on the interwebs, i realized that the 3b doesnt have that front nipple... nevermind!

[madpugger]

I missed these

That would be great Mike. Let me know what you want for it.


Jonas, yes it is M8 to 3.5 ID vacuum line(I think).

M8 is the size. Please post your findings here.

Thank you for looking into possible solutions!

Just a beer dude

[carboRS2]

I hate to burst your bubble, but 034 145 779 D is the vacuum fitting on the cold side of the turbo that connects it to the WGFV. It is not the correct size unfortunately. However, please post back when your part arrives to descibe what you have.

This is 034 145 779D part I just picked up from the dealer. Still haven't fitted to the car but it seems the right one to me.

[carboRS2]

Confirmed!

That's not the rigth part despite what Audi Tradition said...
Damn it!

[carboRS2]

job done

http://www.malpasonline.co.uk/ItemDe...okiesEnabled=1

FINALLY!
This part fits perfectly and has the same or best quality than Audi oem.

Thanks a lot Error!

[Wheeljack]

And I did not see it mentioned, but an ABY manifold will also have the same nipple. BTDT. Just some additional FIY...