Reattachment of intake breather pipe in Cam cover

[Jonas_R]

So,

I removed this breather pipe from my CAM Cover, and I would like to reattach it (see attached pic).

I was thinking that I could use some hight temperatyre loctite to glue it back in?

Any other good suggestions?

Any recommendation for a glue to use?

[mac2226]

I used gorilla glue on edge of pipe and rocker cover like a bead but the rocker cover was removed to do this as I was changing gaskets.

[Lago Blue]

Jonas,

Purely out of curiosity sir, if it's not too much trouble, would you mind please posting a photo or two of the underside of your cam-cover to show how the (perhaps 2?) vent(s?) are configured / fastened from that perspective?

[Jonas_R]

I don't mind but cam cover is on the car so that is not really possible.

The photo I used was from last year just before I installed the cam cover.

[Lago Blue]

Quite alright sir, perhaps someone else will see this request, and be able to respond, or remember to snap some photos with the cam-cover off and upside-down; on a future occasion. I'm interested in the configuration of the vents on the interior side; and how they are secured.

[JOSH,S ABY S2]

I used some anaerobic gasket gel that wurth do in a syringe.