Uprated Wastegate choice

[BrianSmith_S2]

Hi there, nice lookin engine bay.

Will you be making it to ADI at castle combe this year, be nice to see it in the flesh.

Brian

[Jay]

Jamo go for the 60mm Tial same as me. As you are building fresh so dont need to re-mod anything.

Jay

[Jamo]

I see Jeffer had to upgrade from stock to HKS 60mm but i'm now confused by this motorgeek article.

http://www.motorgeek.com/phpBB2/viewtopic.php?t=7251

any comment folks?

Post that article though Javad has upgraded to a 44m tial.

Interesting on Christian car ( which is a stroker with GT30R ) they say a 38mm would be better.

[Jeffer]

We had some problem controling boost with the gt35/40r. The exhaust system didn't provide enough backpressure (wich is good) to divert the gasses through the WG when openend. The exhaust gasses would just rush past it. We installed a 4" dp and 3,5 ich exhasut all the way.

After that Cees installed a 60 mm hks wg wich worked fine. Altough I personally would install and will install the 44 mm tial WG. To big of a wastgate CAN cause a very spikey and unstable boost.

[Jeffer]

OT:

How does you car run Mark?

[terrybullwon]

What about this?

[Mark Halligan]

OT:

How does you car run Mark?

Hi Jeffer

It’s not mapped yet so I am being careful with it.

But it is running nicely (kiss of death LOL) although I did initially have a problem with the high vacuum made by the TS rings pulling oil past a couple of valve guides at idle, which is sorted now.

I know I shouldn’t but I have spanked it a bit while watching EGT’s and I am really beginning to love that GT35/40 although surge is a problem. But when it lights up its ****in mad 4.5K rpm and………well you know

I am hoping to get it mapped soon after I get the gearbox changed, I also have my eye on THIS from Zeitronix so I can see whats happening in a bit more detail.

I am really liking the car again just lately

Cheers

[s2driveruk]

nifty piece of kit that Mark Glad to hear its back on the road again, when is it going to appear at a meet though

[Jeffer]

Good to hear you like it. The gt35/40R is a really nice turbo. It'll only get more and more crazy close to the redline.

[lukach]

I see Jeffer had to upgrade from stock to HKS 60mm but i'm now confused by this motorgeek article.

http://www.motorgeek.com/phpBB2/viewtopic.php?t=7251

any comment folks?

Post that article though Javad has upgraded to a 44m tial.

Interesting on Christian car ( which is a stroker with GT30R ) they say a 38mm would be better.

Like i said: Stock audi WG would works fine for you

[Jeffer]

I'm olso looking forward to the amount of oil coming out the breather with the TS rings on WOT ,1st, 2nd and 3rd gear runs. I hope it's a lot less then the open gap version.

[Mark Halligan]

I'm olso looking forward to the amount of oil coming out the breather with the TS rings on WOT ,1st, 2nd and 3rd gear runs. I hope it's a lot less then the open gap version.

My gapless top rings seal up really well, particularly with the lateral gas ports machined into the pistons, the only downside I have found is that the vacuum they pull at idle will pull oil past the inlet valve guides at idle if the guides are worn even slightly out of spec, or bellmouthed.

[robo]

porche 924/ 911

What do you want this one for then???


http://cgi.ebay.co.uk/ws/eBayISAPI.d...MEDW:IT&ih=003

[terrybullwon]

What do you want this one for then???


http://cgi.ebay.co.uk/ws/eBayISAPI.d...MEDW:IT&ih=003

Wow!!!!

I cant do any thing around here

[robo]

Wow!!!!

I cant do any thing around here

The reason I spotted this cos you outbid me