Here is my new IC fitted on the car. It is the same as Toms and Martins and a bargain at 190 quid. It is massive compared to the RS2 IC.
-
S2,RS2,S4 WB,RS4,S4 B8,RS6 C5,RS6 C6,R8 -
And here is the Xmember. Thanks to Martin for the original drawings. I modified mine to sit further back and higher so it would fit behind the RS2 bumper - and it does - just. Another bargain at 15 quid for stainless parts (cheers Tom) and another 5 quid for some scrap stainless to make the brackets on it.
The expensive bit is the silicon hoses to get it to fit
but it will be getting fitted when the front entry inlet manifold goes on the car.
Before anyone says - one side plate is smaller so I can get a 3" hose up from the outlet of the IC to the maniold.
(Don't laugh at the welds
- it can take my weight so is strong enough 
)
Last edited by Doug_RS2; 17 October 2004, 19:50.S2,RS2,S4 WB,RS4,S4 B8,RS6 C5,RS6 C6,R8 -
Nice work Doug
Mark - ModdedComment
-
Agreed, dont throw those drawings awayOriginally posted by Mark HalliganNice work DougComment
-
LOL I just PM'ed him and said the same thingOriginally posted by sal_s2
Mark - ModdedComment
-
I'll keep Martins drawings and do some for mine since it is differnet to get it to fit behind the RS2 bumper. I think Tom has the same as Martins on his car.S2,RS2,S4 WB,RS4,S4 B8,RS6 C5,RS6 C6,R8Comment
-
Hello
Doug did you sale you rs2 IM?
thx
__________________
Robsigpic_________
RobComment
-
Not yet - but Mark has one for sale just now in the For Sale sectionOriginally posted by roboS2,RS2,S4 WB,RS4,S4 B8,RS6 C5,RS6 C6,R8Comment
-
Sorted doug!!
i think i'll be repairing this RS2 bumper i have and make another x-member for it to fit correctly.
martinComment
-
Eeek does this mean I have to hide.....Originally posted by martinjs
DavidComment
-
LOL, maybe....i could do with buying some sort of welder anyway though, so i should be ok david
martinComment
-
Let me know if you need any help!Originally posted by martinjsLOL, maybe....i could do with buying some sort of welder anyway though, so i should be ok david
martin
If you are going to buy a welder, MIG may be the best option, I would suggest that you don't get a gasless MIG welder as you are stuck. If you get a mig with a bottle then you can always use gasless wire. I would suggest getting a decent unit as well. Don't go for the cheapest or you will regret it.
this lot seem helpful and reasonably priced. No link with them but they don't bulls**t you when you speak to them.
DavidComment
-
Yeah it will be a mig i'll want, with gas as well. :-8
thanks for the link
martinComment
-
Have you had to trim anything off the back of your bumper doug?Comment
-
Pleasure, I want an HF TIG welder next ( single phase)Originally posted by martinjs
Just don't like the price of them...
DavidComment
Comment