more problems Mot failure, rear subframe

[220bhp]

[220bhp]

Anyone got a diagram of the rear suspension that will Identify the parts I will need

[S2TORNADO]

Blimey, that'll take some fixing!!!
The"good" bits aren't exactly great and the bad bits have all but disappeared. Worst still, most of the problem areas have dimensionally critical features, rather than just a straightforward patch or two.
There's so much metal got to go back in there you'd probably need another subframe alongside just to get the critical dimensions somewhere close.

[newsh]

https://audi.7zap.com/en/rdw/audi+co...oq/1991-141/5/

[newsh]

https://audi.7zap.com/en/rdw/audi+co.../5/505-505010/

[220bhp]

Thanks so much John, a great help .
I have just compiled a list .
I was shocked at the price of some of the parts I need to new control arms , and two new complete wishbones as well as all the mounts.

[s2driveruk]

Wow...that is certainly crusty. I do have a spare rear subframe that i could be persuaded to part with but i would get it blasted first to check its 100%. Shout if you are interested and i can did it out.

[4WDrifter]

Here's one
https://www.ebay.co.uk/itm/Audi-Coup...4AAOSwTOtap6tw
NCTS

[John.]

Here's one
https://www.ebay.co.uk/itm/Audi-Coup...4AAOSwTOtap6tw

Condition looks VERY GOOD too.

NCTS

[quattrodave]

Hmm, I remember when you pick these up for less than £50 not so long ago, supply and demand I guess, recently bought a rust free rear A4 B5 quattro subframe from states had to pay around £170 in total delivered and I baulked at that.

[LHD_Kid]

but 425 quid....??? you gotta be kidding.......

[quattrodave]

Shame its not a B4, theres a rear here for a saloon or avant quattro with new bushes for half the cost of the coupe one and these must be even rarer.

https://www.ebay.co.uk/itm/Audi-80-b...4383.l4275.c10

[220bhp]

Now the proud owner of a subframe thanks to David s2driver uk whocame to my rescue.
now all Ihave to do is find a load of me parts and refit it .
Oh wow

[220bhp]

The new subframe with all new parts is now fitted.
I just need to set the alighnment .
.Not sure of the correct cast and camber with 15mm spacers all round and, 18inch wheels .
if anyone could advise me I would be very greatful
as l need to get the MOT done

[s2driveruk]

Glad to see you got all the bits rounded up Lou!