Is it possible to get upgrades or do i have to buy standard one's? Liam.
-
Welsh back lanes are the best!:mischeif: -
There are upgrade ones kicking around, some like them some don't depnds what other suspension bits you have the harder the shock/spring the quicker the top mounts wear out
iainComment
-
there are also two types of standard topmounts 'blues' and 'greens' In theory the blue is the better and is slightly thinner too but to be honest its a weakspot in the design of the component and fails fairly frequently, you'll know as the steering is a bit more vague and it thuds and clunks a fair bit too.sigpic
1992 3b S2 CoupeComment
-
-
I have found lots of OEM top mounts that have not been secured correctly, which could lead to their premature failure. Actually I’ve found a few dampers loose too, which probably doesn’t help either.
But whichever top mounts you get, make sure you tighten the necessary fasteners correctly. Chasing bits around with screwdrivers will not do it, contrary to many mechanics’ beliefs.
I used blue top mounts for quite a while. Changing the OEM mounts doesn't take too long with lowering springs. I found it hard to justify spending the extra money that the uprated mounts cost, so I didn't bother.SSComment
-
Sorry for thread napping to the OP... BUt Ive just bought a full set of new blue top mounts as mine have totally had it!!
I have the slotted nut tool. but not the 22mm slotted socket VAG 3078
Is there any kind person who could lend me yours asap and if it has to be posted (ie. not local ) I will of course pay both ways recorded
Failing that wheredo I buy it?? vagparts said they couldnt supply?Comment
-
You can use a 22mm deep offset ring spanner.SSComment
-
Cheers Stu
Would this do it??
Here
And does anyone know if Halfrauds sell them as I need one tomorrow!!Comment
-
Yep. That's the sort of thing. I'm not sure about Halfrauds though.SSComment
-
i have the green Meyle topmounts from ebay, the reinforced version of the oem mounts, must install them only still.Comment
-
Ive got a set of QRS mounts which i recently fitted on mine and im well impressed.
Pete.'If you ain't broke it you ain't trying hard enough'
Oh sh*t i broke it
94 S2 Homefried Decatted Slipperwagon,QRS Top Mounts,Ally Subframe bushes,Poly ARB & Wishbone bushes,RS2 ARB's,Koni & H&R's,Cupra Brembo's and 312mm discs
Comment
-
I used an old 22mm socket from a cheap set and ground a couple of flats on it for an open ended :thumbsSorry for thread napping to the OP... BUt Ive just bought a full set of new blue top mounts as mine have totally had it!!
I have the slotted nut tool. but not the 22mm slotted socket VAG 3078
Is there any kind person who could lend me yours asap and if it has to be posted (ie. not local ) I will of course pay both ways recorded
Failing that wheredo I buy it?? vagparts said they couldnt supply?Comment
-
You tight git John....!
perfect solution though.... I know now, so I when I come to do mine ....
Honda CBR 1100XX Blackbird Turbo....undergoing major changes.....
S2 Coupe... bit easier off the line...
'03 ZX12-R daily hack.... lots of nice bolt ons...Comment
-
Good plan newsh
I cant bear to grind up the only 1 I've got (a britool one) so I'll head down to Halfrauds first thing and buy one from there fit for purpose
(though their sockets seem remarkably good going on the ones Ive bought from there for similiar purposes before!!)
Cheers guys
Comment
Comment