Potential GB - Powerflex missing bushes

[lind4hl]

sounds good to me, i need that last bush

when i have time to go to the garage of course

Collectiong parts is always fun though.

_______________________________________

How long time is powerflex taking you thinl??

[Flat on my back]

.

Looking to get all the parts delivered this week.

[lind4hl]

are you going to drive it up/down(?) to Powerflex??

[Flat on my back]

Slowly...

Dislodged (30mm)collar bone means i've not been able to drive...

But now sort of okay.

[lind4hl]

how is this going*??

[madpugger]

See here for pic http://www.s2forum.com/forum/showthread.php?t=37633, and here http://www.s2forum.com/forum/showpos...&postcount=439 for Anders solution. Also worth noting early cast arms have a 180mm bolt, later pressed arms have a 212mm bolt. I'm working on the basis you can shorten the bushing, centre sleeve, and use the later 208mm bolts. ....to be confirmed of course

Or Powerflex could make us the correct bushes

[mcandmar]

the feeling I'm getting is that the inner bushes have same diameter as used on pressed arms, but they need to be shorter in length for a nice fit in the cast arm... To be confirmed of course - Would be a very easy tweak for PF if that is the case to productise such a variant.

See here for pic http://www.s2forum.com/forum/showthread.php?t=37633, and here http://www.s2forum.com/forum/showpos...&postcount=439 for Anders solution. Also worth noting early cast arms have a 180mm bolt, later pressed arms have a 212mm bolt. I'm working on the basis you can shorten the bushing, centre sleeve, and use the later 208mm bolts. ....to be confirmed of course

[madpugger]

Carlos, got your PM ta

Good work!

I will give you a call tonight hopefully, once I have finished work. And I will try and call PF tomorrow.

My mate with an RS4 has said he will bring the topic up on the forum he uses, but no idea if he has or which one it is.

[Skull]

Can I be so bold to ask that the upper wishbone bushes get looked at first - for cast applications - the feeling I'm getting is that the inner bushes have same diameter as used on pressed arms, but they need to be shorter in length for a nice fit in the cast arm... To be confirmed of course - Would be a very easy tweak for PF if that is the case to productise such a variant.

AndersS2 has done this! I could not remember who did it, came to my mind today.

http://www.s2forum.com/forum/showthread.php?t=13182&page=30

[Flat on my back]

Off the top of my head...

RS246,
Audifans.net,
Club-Audi

Who else needs to be contacted?

[lind4hl]

send a pm to madpugger though, but i think he will look in his thread

[Flat on my back]

.

I beleve that is correct.

[lind4hl]

Much cred to you Flat_on_my_back! great work

[S2central.net]

Can I be so bold to ask that the upper wishbone bushes get looked at first - for cast applications - the feeling I'm getting is that the inner bushes have same diameter as used on pressed arms, but they need to be shorter in length for a nice fit in the cast arm... To be confirmed of course - Would be a very easy tweak for PF if that is the case to productise such a variant.

[Flat on my back]

.

Not sure who has been in contact with PF.

Need them to PM me so we can have a chat...

Where are PF exackerly?