Potential GB - Powerflex missing bushes

[madpugger]

Superflex already make them for the front

Who?

A guy called Paul Solbe. obviously a one off is not much interest to them, so the more interest the better.

Jamo, what was the other one you thought of? The rear track rod?

[Error404]

Superflex already make them for the front

[Jamo]

Avant subframe is M12 I'd be interested in a complete set price dependant.

[Error404]

who was it your spoke to about this?
I had zero interest from them for a poly bush for the rear toe arms for the coupe

[madpugger]

Decided to start a fresh thread for this...

Initially I was gauging interest for Avant rear hub carrier bushes to contact Powerflex about developing them. They were very helpful and said that they would look at doing all the bushes we require from them but the higher the interest the faster they will get done.

He has asked for the rear suspension setup from an Avant to be dropped off with him if someone has one? It just has to be one side and would be preferred if it had the top arm that they dont do the bushes for - I cant remember which this is? He would ideally like to keep the suspension for 1 to 2 months as he thinks that if we had good enough interest they could be up and running in around 6 weeks. (for the hub bush to start with )

If someone has one and can drop it off in an Avant, they will pop the car on the ramp and look at the subframes with a view to doing them too.

I have discussed with them doing the following, so if you are interested please copy and paste the entire list and add your name. Feel free to add other bushes not listed.

AVANT REAR HUB CARRIER LOWER BUSH:

MadPuGGer
Jamo
lind4hl
mcandmar
Ducky
GT500
Smith__S2
Big Lee M

AVANT REAR SHOCK BUSHES:

MadPugger

AVANT REAR UPPER ARM BUSHES (not listed type):



AVANT REAR SUBFRAME BUSHES:

MadPugger

DIFF MOUNT BUSHES:

MadPugger

FRONT SUBFRAME (State type):

MadPugger (M10 I think)


There is no commitment here, but please genuine interest only...

Thanks
Mike