I have RS2 front and rear on mine and I quite like how it handles especially with H&R springs and slightly lower profile tyres. Would like perhaps slightly stiffer shocks too but not overly fussed as its still really comfortable to be in and what with the roads getting worse...
RARB options for the Avant?
Collapse
X
-
-
Upgrading from RS2 Front and Rear to RS2 front Neuspeed rear is a big improvement. Well worth the money!!
I have RS2 front and rear on mine and I quite like how it handles especially with H&R springs and slightly lower profile tyres. Would like perhaps slightly stiffer shocks too but not overly fussed as its still really comfortable to be in and what with the roads getting worse...Comment
-
Just remember that a silly stiff rear bar might make the car handle well on a smooth road but it doesn't do much for ride comfort (due to removing axle articulation) and can make the rear a bit bouncy and skittish (as ARBs remove grip from an axle, rather than adding!) - this is from first hand experience of my FARB on the rear of the coupe and just ask s2avant about the ability of even a well setup avant to oversteer!
The ideal solution is to fit stiffer rear springs and sort the handling balance out at the source, rather than putting a plaster (rear ARB) on the car to sort the problem of Audi being so safe with chassis setup (think of ARBs as a way to balance a road chassis setup rather than the handling solution of choice). There aren't off the shelf springs that I'm aware of that do this but it would be a simple exercise to do a group buy on 10% or 20% stiffer rear springs that sit at a stock rideheight, as the Avant rear springs are a far simpler design than the front / coupe style. Springs would be ~£100 a pair for the rears, thus 1/2 the price of an ARB.
Just a thought...Cheers'en, AndyC
1994 ABY Coupe - Projekt AlpinweissComment
-
Rs2 front and whitleline rear (without brackets)....bilsteins all round....and I am still not 100% the difference between the stock front and the RS2 version...testing still on-going
Comment
-
Rusty i would be interested in stiffer rear springs for my avant if say 20% and a drop of 30mm too. I dont want to go back to standard ride as I like the way the car sits with the wheels however I would like it stiffer for slightly more fun and dont really want to change my ARB's.
Would this be possible for £100ish?Comment
-
I got a quote for a set of custom coupe springs, it was under £200 for all four. I will find the company when my email wants to work again.Rusty i would be interested in stiffer rear springs for my avant if say 20% and a drop of 30mm too. I dont want to go back to standard ride as I like the way the car sits with the wheels however I would like it stiffer for slightly more fun and dont really want to change my ARB's.
Would this be possible for £100ish?Current-2004 Impreza PPP wagon
Sold-92 3B coupe-RS2+, 996s, konis, rear torsen, forged rods........
Sold ABY-stockComment
-
Drop a wanted ad on Audi SRS for an RS4 rear bar and check ebay, I got mine for 45 quid (RS4 front and rear)Comment
-
Count me in Rusty.There aren't off the shelf springs that I'm aware of that do this but it would be a simple exercise to do a group buy on 10% or 20% stiffer rear springs that sit at a stock rideheight, as the Avant rear springs are a far simpler design than the front / coupe style. Springs would be ~£100 a pair for the rears, thus 1/2 the price of an ARB.
Just a thought...
My Avant has standard springs, bilstein front shocks, RS2 FARB and rear shocks and the Neuspeed RARB set on it's stiffest setting. It's fine on the road but understeers like a pig at track days. I'd been thinking about going back to a standard S2 FARB but I'll give a better set of rear springs (or the full set you were talking about a few months back) a go.
Cheers
David1994 16v Coupe - Sold on and sadly missed
1994 S2 Avant - Warmed up a bit
1995 A6 Avant - Dag Dag DelightComment
-
Coil springs was the company I got prices from
1 car set will cost £175+vat. Delivered. 5 car sets wil cost £125+vat/set -delivered.-to the same address.Curent lead time is 5/6 working weeks from receipt of order with cheque +samples.Current-2004 Impreza PPP wagon
Sold-92 3B coupe-RS2+, 996s, konis, rear torsen, forged rods........
Sold ABY-stockComment
Comment