how to mount chassis audi s2 on sedan type 85?

[poor-boy]

I used ur flywheel and clutch with a roller bearing pressed into the end of the crank. I am about to mount full s2 subframes, Hubs etc to my 90q whilst keeping the original gearbox and diff. I guess I'll have to swap the inner cvs over or are they the same?

I am sure the cv's are different - but someone will correct me..

[hajbed]

I am sure the cv's are different - but someone will correct me..

I confirm, the CV's are different.

[hajbed]

To sum up:

I have on my sedan all of the UR except the gearbox and rear I want to keep.
I have in stock of the S2:
- steering bars
- shafts
- struts (with hubs)

Can I fit all this of S2 but keep the subframe of my T85q?
Can i mount the S2 struts mount on the subframe of my T85q?

Thank you.

[quattrostyle]

Can I fit all this of S2 but keep the subframe of my T85q?.

Nothing to do with the subframe as long as the wishbones, ball joints and CV joints fot the S2 hubs...

Can i mount the S2 struts mount on the subframe of my T85q?

You probably mean the swaybar? AFAIK yes that's possible.

[caterpillar]

the s2 strut will fit.. the swaybar too... but the balljoint may be different...

[hajbed]

the s2 strut will fit.. the swaybar too... but the balljoint may be different...

For the balljoint i think to, so i guess i have to put the S2 wishbones (if they fit on the T85Q subframe) to mount the S2 balljoint.
The other solution is another model balljoint and keep my T85Q wishbones (19mm last B3 etc...)
You confirm?

Thanks.

[caterpillar]

the s2 wishbone does not have the hole for the litle joint for the front arb; they does have a little ear/ bracket under the spring bottom; so you need all the front parts from a audi 20v or s2 verson... all parts will fit the subframe...
i have a vw 32b with the audi 20v( 170hp) front parts; everything; they did fit right in; exept i use the wishbone form audi 80 diesel( 91-93) they are asymetric and have 3(!!!) holes for the balljoint and 19mm tap...also the s2 farb, with the "rackelrods" under the spring bottom..

[hajbed]

Ok thanks you for your help .