Top mounts! Whats the definitive answer?

[bambridge]

Earlier in the post another set was going to start putting on miles from July, did that happen?[/QUOTE]

The member has decided he wants to fit a coilover kit, and wants to do all the work in all one go, makes sence

[DJones]

Earlier in the post another set was going to start putting on miles from July, did that happen?

The member has decided he wants to fit a coilover kit, and wants to do all the work in all one go, makes sence [/QUOTE]

Was there ever a conclusive out come to this Kev ?

Darren.

[steverrquattro]

All being well Kev, my car will be ready at the end of April or maybe earlier. I called in at the bodyshop this week and they are definitely on with it.

For those of you considering the top mounts, I have also gone for the same theme with the rear diff, gearbox and engine mounts.

Kev also did me the coilovers as well.

[A80Avant]

Slightly off topic but I was wondering if Kev could make the sleeves of the cpilovers in stainless steel as they get surface rust fairly easily with the UK weather. Would be more robust.

[DJones]

So does Kev now sell these top mounts?

[cooperquattro]

Those engine mounts won't work Steve,as our mount that fasten to the gearbox and engine have slotted holes the engine will move under load as the poly is too soft to clamp them,if the mounts were not slotted they would be ok
Not having a go at kev just trying to be helpful

[cooperquattro]

So does Kev now sell these top mounts?

I think he does and they look top quality

[bambridge]

Those engine mounts won't work Steve,as our mount that fasten to the gearbox and engine have slotted holes the engine will move under load as the poly is too soft to clamp them,if the mounts were not slotted they would be ok
Not having a go at kev just trying to be helpful

Sold over twenty pairs of these and no complaints yet

Stainless Steel threaded tubes would cost a fortune due to material costs and longer machining time

[A80Avant]

i see.

thanks for that. i may be getting a spare set for the front tubes then at some point. will get in touch through Brian

[Error404]

see if you can find someone to cad plate them Vas

[A80Avant]

Cad plate? What's that?

[steverrquattro]

Ignore.......tried to delete.

[mcandmar]

Any update on these top mounts Kev?

I'm getting desperate now for a decent solution, these "HD mounts" aren't worth a *****.

[Rusty]

Fingers crossed, Kev is currently making my prototypes

[Golfboy666GTI]

Has anyone tried either of these solid top mounts in there S2/RS2?

http://www.raceparts.cc/product_info.php?info=p510_top-mount--audi-s2-80--front--fixed.html

http://www.compbrake.com/cars/audi/q...ixed-each.html

Im thinking of putting some in my daily driven RS2, am I mad? Will they put to much stress on the chassis?