Top mounts, where to buy???

[BRY]

@ imsatim
How much to supply and fit the fronts and back?

[audiman]

Didnt get time to phone you again Tim!! sorry about that. Will try tomorrow, if work goes to plan!

[imsatim]

Didnt get time to phone you again Tim!! sorry about that. Will try tomorrow, if work goes to plan!

10/4 tom i know what its like..........tim

[panzerwagen]

Tim, you better hold to your hat but...

word has hit the USA shores about your mounts. I think Nononsense can verify this. There are gonna be inquiries about the mounts. The only sticking point is the cost. There's even talk of having somebody dupe them from mine. What a joke! Can't see how, they are on the car!!!
Hope they are copyrighted and patented?

[panzerwagen]

Tim, you better hold on to your hat but...

word has hit the USA shores about your mounts. I think Nononsense can verify this. There are gonna be inquiries about the mounts. The only sticking point is the cost. There's even talk of having somebody dupe them from mine. What a joke! Can't see how, they are on the car!!!
Hope they are copyrighted and patented?

[imsatim]

yo

word has hit the USA shores about your mounts. I think Nononsense can verify this. There are gonna be inquiries about the mounts. The only sticking point is the cost. There's even talk of having somebody dupe them from mine. What a joke! Can't see how, they are on the car!!!
Hope they are copyrighted and patented?

hi,panzer they are copywrited,the best form of advertising is by people copying them,it took a few months of reaserch+testing to produce these,even the alloy is a special grade,std alloy is to soft allowing the bearing to push through the mount.the rose joint or moonball has a very high rating cheaper ones run the risk of the ball being pushed out of the socket....tim

[NoNonsense]

@ TIM: yeah Tim...we are all interested here in the US. Panzer is our only source so far...we value his opinion. Don't worry, nobody will dupe your product...and if they did, i'm sure it wouldn't be as great and they'll fook up their car.
As I mentioned, I've been working with a rally mechanic to develop something, but yours seem like the better alternative...and probably less expensive too.

@ Panzer: You should post every so often on the forum. People are really looking for your opinion on these things and it would be better coming from you than through an e-mail you sent to someone else.
Just kidding... ;-)

[panzerwagen]

"You should post every so often on the forum."

NoNonsense buddy YOU ARE KIDDING? Right? With the frat boy antics and attitude from certain members there, Not in the near future. I lurk but that's all I'll do. The mature and adult members are declining on that Forum. You are one of the last along with some others I can count on one hand. Unfortunate because it use too be a great Forum.

[NoNonsense]

NoNonsense buddy YOU ARE KIDDING? Right? With the frat boy antics and attitude from certain members there, Not in the near future. I lurk but that's all I'll do. The mature and adult members are declining on that Forum. You are one of the last along with some others I can count on one hand. Unfortunate because it use too be a great Forum.

you are correct, but I just ignore the idiots...
it's kind of like driving in NYC (like I do nearly everyday)...if you pay attention to all the idiots, you'll probably be full of road rage and want to kill someone...but instead, i let the people be idiot and it doesn't bother me. Why should I let some elses attitude (bad attitude) rub off on me and make me pissed off? I just watch the idiot be idiots and try to kill other idiots! hehe

[panzerwagen]

So when are you gonna take the plunge & get these mounts?

NoNonsense they are a must have. Last nite I went to a suburban mall outside of Chicago and deliberately took small roads to it. Lots of twist & turns on this road and all I can say is...MAN!!

[ottawa coupe]

panzer, what are you driving?

do you have a sedan or coupe? and are you running an aftermarket suspension setup? i've got some pretty serious clunking going on at both ends right now (rear diff is making itself know as well ) i'm definitly going to get these in the new year when i tackle the rebuild of my coupe!!!

I hope you're planning to produce more than a pair at a time Tim!

[panzerwagen]

"do you have a sedan or coupe?"

Ottowa, I have a CQ with a Bilstein/Intrax upfront and back. A Jamex Strut Bar ties the Bilsteins together. Tims mounts makes the front as solid as a block of granite. The clunking in back I would not let go too long unless you want to replace the subframe too. Leave the diff moving around as it sounds & it will start cracking the subframe as some on the CQ list have complained about.

[ottawa coupe]

i'm pretty gentle on the shifts at the moment (occaisional foray in snow covered parking lots aside ) and my mechanic performed the cheap mk1 vw engine mount mod to the rear diff mount (which works QUITE well btw), but the others are old too. basically, she'll get me through the winter so i'm not performing this work on the driveway in minus effing 25C

a significant part of this winter will be spent researching various (not too expensive) ways of solidifying the thing. thankfully, it's not too far gone, a little neglect but by far the worst was the motor, now solved. the car came with h&r springs, not sure what's up with the struts tho (stock or not)

[GlynRS2]

Group Buy

group buy

--------------------------------------------------------------------------------

i,can work out a discounted price for a group buy.the ones on ebay were buy now and went to a lad in france i relisted them and 2 sets are going to greece,ive relisted some more.... thanks to various people for there help in getting the pics up.thanks to paul for an excellent site,we are all here for the improvement af an already pretty good car to start with....tim

Well what about it for the New Year? - I think we are all feeling a little poor just at the moment.
How many people would be interested?
I certainly could do with a pair for my RS2 - it eats top mounts.

[Pete_RS2]

I'd be interested. I've noticed mine making more noise recently.