Master or slave cylinder how do I know

[Rikki Kitto]

OK so after just 3 to 4 years looks like my clutch slave cylinder has given up again but maybe is the master how do I know for sure before buying a new one and any links to part numbers would be amazing I've tried looking but I get easily confused

[Michael S2]

The master cylinder is located at brake pedal area. So have a look to see if there's any fluid escaping?

[Rikki Kitto]

Good point thanks for the tip will check tomo in daylight

[piotr]

if you clamp the rubber hose on the gear box (with hose clamp)and press clutch pedal if its building pressure(get hard)the master is in good shape.

[Rikki Kitto]

Cheers I'll try that too before spending

[Rikki Kitto]

Master cylinder defo I've got fluid on the clutch pedalanyone got links or part number

[Tractor Dave]

Master cylinder defo I've got fluid on the clutch pedalanyone got links or part number

Pete at Quattro corner has them for £85 ish. I phoned him last week when I thought I needed one. Luckily, he was out of the office and not able to take my order. In the meantime, I re bled the clutch using the reverse bleed method and it sorted the issue nicely. My clutch pedal wasn't returning properly and the bite point was very low. I did look at Autodoc (no recommendation from me) and they have got a seal kit if you fancy refurbing your existing one. From my experience with them, they will probably send you the wrong kit

[Rikki Kitto]

Cheers bud I've had lots of stuff from Pete over the years not cheap but always sends the right parts, on another topic bit strange I was trawling through ebay found this and thought of you. I was just about to put the link on your post so I'll leave it here

https://www.ebay.co.uk/itm/Nothelle-...uWa:rk:40:pf:0

[Tractor Dave]

Cheers bud I've had lots of stuff from Pete over the years not cheap but always sends the right parts, on another topic bit strange I was trawling through ebay found this and thought of you. I was just about to put the link on your post so I'll leave it here

https://www.ebay.co.uk/itm/Nothelle-...uWa:rk:40:pf:0

Nice! If I put it in my window I wont be able to see out

Let me know if you need to borrow my reverse bleed kit

[newsh]

Nice! If I put it in my window I wont be able to see out

It goes on yer garage wall

[Tractor Dave]

It goes on yer garage wall

Really? I thought it was a German sun visor

[Rikki Kitto]

Cheers for the offer I have a spanner monkey to do my dirty work

[Tractor Dave]

Cheers for the offer I have a spanner monkey to do my dirty work

Lucky you. I am the monkey in the garage here

[Rikki Kitto]

I do what I can but usually make things worse

[Rikki Kitto]

OK peeps Pete only has the 3B type with the thinner rod can I take my rod of and fit it to this one or is there any other types that work