034 Diff Mounts

[newsh]

I've been using the powerflex one for some time with no issues.

[Rusty]

I've had it for 3 years and still have a big clunk at the back, everything was done at the same time so it should be tight. Could only be the prop centre bearing or diff bush...

[Kieron20V]

Thats what my cq is like Andy, has solid everything and still clunks. Either prop bearing or cv joints on prop are left, the diff itself is firmly bolted in there.

[trackslag]

Yup thats the one. I had one for my coupe, then swapped it for a 034 one. Fitting guide here.

nice one, thanks for that will get me one this week.

[Mr.Crossfire]

Thats what my cq is like Andy, has solid everything and still clunks. Either prop bearing or cv joints on prop are left, the diff itself is firmly bolted in there.

Do you have the engine mounts solid too? Especially the front mount? Could be the cause of "clunking".

[stiglet]

034 mounts are Delrin = harder than Polyurethane. Fact.

If you still get the clunk, possibly it's CV joints.

[stiglet]

Do you have the engine mounts solid too? Especially the front mount? Could be the cause of "clunking".

When you use solid engine mounts, the front mount does nothing.