Carbondesign RS2 lower door trims

[kinaputt]

Thanks. I think these are the part numbers for the eight RS2 lower door mouldings (not middle door mouldings). See my post on this thread on 22 June 2017 at 22:40. Unless Audi have changed the part numbers.

Yep! A typo by me ...

[rustybullethole]

Thats great news that they're producing them to original standard again and a decent price too, as opposed to what some UK company is now selling them for.

[Fat Audi 80]

Regarding new metal runners, if anyone can supply me with a drawing or part, I have a good sheetmetal company in the UK that can quote competitively for these. I am happy to do the leg work if there are some members interested. Let me know...

[bhlegit]

hey guys does anyone have the part numbers for the MIDDLE door mouldings? Or anyone that reproduces them? Thanks

[Jiri]

Replica of the middle protection strip can be find here

8 Body - Audi onderdelen (classicteilebrunner.ch)

[david1980]

Replica of the middle protection strip can be find here

8 Body - Audi onderdelen (classicteilebrunner.ch)

Ouch! That price ain't great, I bought a set off a guy on fb that was genuine for a lot less. Tot's also does these I believe for less.

[Jiri]

I'm looking for the right rear passenger door middle strip only... the guy on FB still have parts?

[MikkelGraabeck]

i would just hear if these are still avalibel ?

[K Simmonds]

No they are not but may now be available from Audi tradition for which there are regular group buys

[david1980]

Only a couple are available, some pieces are nla now

[Tractor Dave]

I have a set on order from a company in Germany that have reproduced them. They should be with me soon so i will let folks know what the quality is like. As David says, Tradition no longer have them all available and the ones i wanted were nla.

[Tractor Dave]

I'm looking for the right rear passenger door middle strip only... the guy on FB still have parts?

I have a spare. Send me a pm

[K Simmonds]

I've gutted all the rusty steel out of mine and am going to fold new inserts, if you have access to the tools it's actually very easy to get a basic profile.

The worst bit is getting the old metal/rust out. I can make more but not for free,

[Ross]

I'd be interested in a set if you can get some more made up. I have an old set in bad shape mostly scraped free of the old rust, but gave up on the basis I'd rather get replacements from audi tradition but it's been a few years since looking at it and doesn't look like an option now.

[Silver]

Hi all, I'm fairly new on here. Looks like a great place with plenty of experience in finding parts for RS2 and S2.
I would be interested in lower door mouldings and small forward piece and rear quarter part for an S2 Coupe.
Count me in if there needs to be a group buy.