Tweet
Good day Gents,
so been talking about this for sometime and it got canned due to the numbers. I was going to custom make one for myself but after picking up an old project (B5 S4 2.7TT) it looks like this has been picked up again as the B3 S2 and the B5 S4 have the same OD on the crank serpentine pulley @ 157mm.
If any of you are on Facebook , you can read about the development with respect to the B5 S4 crowd.
https://www.facebook.com/groups/1484...=group_comment
So far there are a few variations with respect to the inline-5
- 3 separate v-belt (7A / NM / etc.)
- 1 serpentine @ 157mm OD - AAN
- 1 serpentine + 2 v-belt
We will only be able to do the complete Serpentine belt system.
The rubber dampening ring associated with the OEM pulleys by now have cracked to smitherines. An OEM replacement from Audi is in the $1000-1200 USD range and used samples are not too far away from being cracked.
In order to move forward with a production run , we need at least 30 more people to meet the 100 MOQ. Ballpark would be between $400 & $500 USD.
Who is interested?
LIST:
so been talking about this for sometime and it got canned due to the numbers. I was going to custom make one for myself but after picking up an old project (B5 S4 2.7TT) it looks like this has been picked up again as the B3 S2 and the B5 S4 have the same OD on the crank serpentine pulley @ 157mm.
If any of you are on Facebook , you can read about the development with respect to the B5 S4 crowd.
https://www.facebook.com/groups/1484...=group_comment
So far there are a few variations with respect to the inline-5
- 3 separate v-belt (7A / NM / etc.)
- 1 serpentine @ 157mm OD - AAN
- 1 serpentine + 2 v-belt
We will only be able to do the complete Serpentine belt system.
The rubber dampening ring associated with the OEM pulleys by now have cracked to smitherines. An OEM replacement from Audi is in the $1000-1200 USD range and used samples are not too far away from being cracked.
In order to move forward with a production run , we need at least 30 more people to meet the 100 MOQ. Ballpark would be between $400 & $500 USD.
Who is interested?
LIST:
- Wizard-of-OD - AAN
- Tonks4x4 - 1 serpentine + 2 v-belt (ABY Version)
- Rxy - ABY
Comment