Audi C4 S4 extra front caster ARB mounts

[JP]

Just waiting for arb to be epoxy painted and then mines fitted with new lower arms and bushes. Can take a pic when done if desired be later this week. You'll need to drop front subframe to undo old one.
I also noticed that the main bush that locates the lower arm to subframe was tearing out of its metal sleeve when removing and changing over yesterday so looking forward to the poly upgrade

[macspring]

Thanks JP.

Keen to see how you get on before I tackle mine.

[orignalS60]

@macspring I was just agreeing with you
that it would be cool to see some pics of
these installed. My phone put the wrong
damn emoji thing lol.

@Albert, thanks!

[macspring]

at orignalS60, grand, no worries, makes sense now.

[A1QSHIP]

Parts have arrived this day. Thanks Albert!

[Albert]

[macspring]

Albert, can you advise what bolt length and diameter you recommend for the installation of the new brackets ?

You might consider offering the bolts, nuts and washers as an extra for future customers, as this is what is stopping me from installing mine - lack of time to source same.

[Albert]

It should be M12 and 65 mm in lenght

pics bellow for correct poli fitting

[macspring]

Thanks for the reply Albert, will look to get the bolts this week. Photo to affirm the orientation of the of the bush is timely also.

[Albert]

just to double post, you need this type of the screws. L = 65 mm

[diesel des]

Do we need anything else like nuts or washers?

Sent from my LG-H955 using Tapatalk

[diesel des]

Oh and we call those cap head bolts as they take an Allen key hex bit.

Sent from my LG-H955 using Tapatalk

[Vorsprung durch Technik]

M12 fine but what about tensile strength?

[diesel des]

Oh are they fine?

Sent from my LG-H955 using Tapatalk

[orignalS60]

Albert can you post a link for a good
source of the hardware?