Greg, I had the same problems with those bloody hex bolts this week. To drop the rear subframe, you need to jack it up and support on axle stands, then take out the main bolt through the diff mount and then you can (using a jack of some sort) jack up or down the rear diff. Having said all that the only way i managed to get the botton left hex off was to get an 8mm bit (not a socket) and then use a spanner on the bit of the hex that wasnt sunk into the bolt itself to turn it that way.
Good luck....the change was a real pain in the *** all becuase of access again.
David
Good luck....the change was a real pain in the *** all becuase of access again.
David
Comment