Announcement

Collapse
No announcement yet.

GROUP BUY stainless steel subframe washers 823-199-347

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • GROUP BUY stainless steel subframe washers 823-199-347

    Hello all,

    Large subframe washer 823 199 347 is NLA and occasionally available on ebay ranging from £1.60 - 4.50 each for standard zinc plated mild steel items.

    Standard repair washers don't seem to match the spec of 40x10.5x3mm so I am considering getting some laser cut from stainless steel to finish off my subframe refurbishment project nicely.

    I've got a price for 2 sets of 8 (4 front, 4 rear) which i am happy with but have been told that if i order 100 the price comes down to £1 each.

    I've got interest in a 3rd set to total 24 so far, If I can rustle up interest in another 76 (or 80 = 10 sets) then i will get them ordered. postage should be small packet and therefore not mad unlike the cost in this add...

    https://www.ebay.co.uk/itm/Audi-80-9...EAAOSwXCBaPAvC

    cheers




  • #2
    https://www.volkswagen-classic-parts...en-passat.html

    Comment


    • #3
      Yes, they are mild steel with zinc plating. When I looked at that website they were £1.62 including English vat. £1 each for stainless steel looking a good option to me! they are also 2.5mm, the stainless I am asking to get cut is 3mm.. Not strictly necessary but the mild steel ones I took off were definitely thinner than 2.5mm due to rust.

      Comment


      • #4
        I am in for a set if is for coupe.

        Comment


        • #5
          I'm up for a set.

          Comment


          • #6
            Put me down for a set too please.

            Comment


            • #7
              I would like a set but I think the Avant bolts are slightly larger? Are the diameter of the washers also bigger?
              Nothelle S2 Avant
              Black Ur project
              Ocianic Ur project gone
              S2 Coupe project gone
              Urs6 plus project gone

              Comment


              • #8
                Because I may end up taking money off people, I want to be absolutely sure the holes are 10mm as per spec on OE washer 823 199 347. I've just taken a front subframe bolt off my 7A coupe and it is indeed also 10mm. Some research shows there is actually a 12mm version but no clear split as to when or which model they came on. This thread seems to suggest that 95 year ABY S2 has 12mm front and 10mm rear subframe. 3B S2 and CQ are 10mm front and rear...

                https://www.s2forum.com/forum/genera...-for-aby-coupe

                If you know your bolt sizes update me with whether you need 4 made with a 12mm hole otherwise they will be 10mm. Sorry for the confusion!


                Costash 1 set.
                John 1set
                Arranstone 1 set
                S2eds 2 sets
                Me 1 set

                Thanks all so far - 7 more sets to hit the 100 threshold!


                Tractor Dave, see above - unless you know from your rebuild what you have, i don't know of any way of telling other than if yours is a 95 year then, it seems like they had 12mm front bolts and 10mm in the rear. Suppliers of polybushes list the same bushes to suit Coupe and Avant but still add on 'depending on bolt size'.



                ​​

                Comment


                • #9
                  I'll have a set please

                  Comment


                  • #10
                    I cant remember now. It seems like ages ago! Put me down for 12mm front and 10mm rear. I can always drill them out if necessary.
                    Nothelle S2 Avant
                    Black Ur project
                    Ocianic Ur project gone
                    S2 Coupe project gone
                    Urs6 plus project gone

                    Comment


                    • #11
                      Costash 1 set.
                      John 1set
                      Arranstone 1 set
                      S2eds 2 sets (1 set for late aby 4 front 12mm and 4 rear 10mm. 1 set of 10mm)
                      Me 1 set
                      Tractor Dave. 1 set. (4 front 12mm and 4 rear 10mm)
                      ​​​​​​​LukasR 1 set.

                      For those who have shown an interest, don't forget to let me know if you know you need 12mm for the front subframe or not.

                      6 more sets to hit threshold

                      Comment


                      • #12
                        Costash 1 set.
                        John 1set
                        Arranstone 1 set
                        S2eds 2 sets (1 set for late aby 4 front 12mm and 4 rear 10mm. 1 set of 10mm)
                        Me 1 set
                        Tractor Dave. 1 set. (4 front 12mm and 4 rear 10mm)
                        LukasR 1 set.
                        Nuvo x2 sets (each 10mm) please.

                        Comment


                        • #13
                          Originally posted by steve briance View Post

                          Costash 1 set.
                          John 2 sets
                          Arranstone 1 set
                          S2eds 2 sets
                          Me 1 set

                          ​​
                          8 washers in total please

                          Comment


                          • #14
                            Mine is an N95 so front 12mm and rear 10mm please

                            Comment


                            • #15
                              @john, no worries - a set in my book is 8

                              If we hit the threshold then it will £1 a washer plus p+p.

                              ​​​​​​​3 more sets to hit the 100, there is no need to stop there but at some point I need to get the order in. I will give it a week and get the order in on Wednesday 3rd.

                              Comment

                              Working...
                              X