building a sportquattro

[Jeffer]

engine in

[Jeffer]

01E gearbox is in there aswell, with an RS4 shifter linkage

[s2_bo]

Great! Looks like your getting on well there.

Cant wait to see this once its finished.

[zlobo]

looks good

[Jeffer]

now the rear suspension is under it aswell. I've been puzzeling with dampers, and it looks like i'll be using Koni's dual adjustables. the wheels are 8,5 x 17 with stupid low profile tires. These will get the appropriate 80's style tyres

[Jeffer]

the setup

[Jeffer]

diff is also in place

[Jeffer]

There is still LOADS to custom fabricate to have it all fit as i want it. But the first mockup looks good.

[shortsport]

Looking very nice

[volcano rs]

what rate springs are you using length and rate and how did you come to know its right ?

[shortsport]

Sorry to but in i've spoken to Dialynx and keith Edwards and they are using 350lbs front and 300lbs rear if it is of help

[volcano rs]

Sorry to but in i've spoken to Dialynx and keith Edwards and they are using 350lbs front and 300lbs rear if it is of help

anyidea what shocks they are using because mine was bottoming out with koni's

[topsparky]

anyidea what shocks they are using because mine was bottoming out with koni's

get you hair cut then
with a head that big its
bound to reduce the weight

[shortsport]

Looking at an old write up Keith Edwards was using koni,s.Not sure if he still is using them

[volcano rs]

get you hair cut then
with a head that big its
bound to reduce the weight

your belly's so big you had to go and buy an s4 to accomodate you