Also on another note, the engine bay is painted, the front subframe and arms are with the powder coater and I've ordered all the bushes to get the subframes built up and back on the car.
Announcement
Collapse
No announcement yet.
RS2 rebuild
Collapse
X
-
Originally posted by Dan rs2 View PostDigging through the parts I noticed this back plate was corroded and the steel clip has come off which I haven't found yet. How hard are these to get hold of? Or is it worth me trying to repair this one. IMG20240318160156.jpg
https://shops.audi.com/en_GB/web/tra...term=8A0615411Nothelle S2 Avant
Black Ur project
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project gone
Comment
-
i would go for a set of new ones. mine looked ok and after blasting them you could see several cracks in the brakets. danger in buying overpriced used stuff is big. 8A0615412 8A0615411 are the part numbers for them. trust me if you dont buy them new now in few years if your go bad you wont find anything.
Comment
-
IMG20240325105840.jpg this vacuum line doesn't belong here I take it.
Is it supposed to be here instead? IMG20240325105820.jpg
Is there anything above the tank to fit before I put it back in? Most of the bits are powder coated now so I'll start reassembling it.
Also where's the best place to get the right nuts, bolts and washers for the suspension arms as they're all crusty and I've found a couple with damaged threads.
Comment
-
Defo shouldn't be where it is now! The other grommet seems the obvious place.
Ultra performance do very nice zinc bolts at a reasonable price. Audi also still stock some.
https://www.ultraperformance.co.uk/a...olt-n-90489301Nothelle S2 Avant
Black Ur project
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project gone
Comment
Comment