20V CQ Tidy Up

[quattrostyle]

I bet the issuer was proud to sign that certificate

[Fat Audi 80]

Well done Alex, great achievement! See you at ADI.

[david1980]

so the big question everyone wants to ask is have you got an s2 yet and how long before we see a (aqua?) s2 cq tidy up thread?

[Error404]

haha, no not yet but I am talking to a couple of people

[andy10v]

Well done!

I am sure you will have the niggles sorted ASAP now she is on the road!

[Error404]

Cheers mate. Yeah I have a few things to fiddle with for a few hundred miles. Can't wait to plug the N75 in and see if its faster than the S4

[andy10v]

That will be interesting; down on power, but lighter. Will probably feel faster, less of the magic carpet effect.

[andy10v]

What ecu/chipset do you have?

[Error404]

I have one of Paul's V-stream Homefries chipset so should make the most of the larger RS2 sized cooler I have fitted, so I'm hoping for close to 300hp with it. The S4 has IIRC 345hp but it's close to half a ton heavier. Mine will have more torque. Should be fairly close on paper, the coupe might just have the edge. Like you say, I think the coupe will feel quicker as its lower, stiffer and noisier

[andy10v]

its lower, stiffer and noisier

You know the rules, it must be faster then!

[4WheelDrifter]

Congratulations, Alex. I can only imagine how it feels to get the old Panthero back on the road with its new spec.
I am looking forward to seeing it at ADI. I am bringing my helmet.

[Error404]

Cheers Pal
If I have time to put enough miles on it before ADI I might be up for a few laps, see how we get on. so I'll be taking my lid too

[Jaswan]

Hi,

You have done an absolutely fantastic job. Your attention to detail is superb!

I'd be too exited about running boost, bet you can't wait to get the alignment done?

Vvnice

Jase

[K Simmonds]

Nice one Alex, good result!

I'm pretty sure I could give my folks RS6 a serious run for it's money in a straight line upto about 140 now I've got the full RS2 set up running properly so with the best part of 300 BHP you should be able out drag an S4.

[re2500]

I have one of Paul's V-stream Homefries chipset so should make the most of the larger RS2 sized cooler I have fitted, so I'm hoping for close to 300hp with it. The S4 has IIRC 345hp but it's close to half a ton heavier. Mine will have more torque. Should be fairly close on paper, the coupe might just have the edge. Like you say, I think the coupe will feel quicker as its lower, stiffer and noisier

She'll definately be faster than the s4. You'll be surprised at the difference.
Congratulations mate, a clean sheet as expected!