Ok, the two black 80 front door handles are now laser red, along with the passenger wing trim. That's all the black trim gone and all nicely colour coded same as the S2 saloon.
The handles are painted alloy, so rubbed them down with some 1200 wet n dry, then a scotch pad. Made sure they were clean with copious amounts of cellulose thinners and a microfibre cloth, then masked up and the laser red sprayed directly on. No primer was used on the handles, just on the small bit of wing trim.
Six coats all in all and as the sun was blazing today, I only left around 5 mins between coats. They were dry enough to touch within that time.
The handles are painted alloy, so rubbed them down with some 1200 wet n dry, then a scotch pad. Made sure they were clean with copious amounts of cellulose thinners and a microfibre cloth, then masked up and the laser red sprayed directly on. No primer was used on the handles, just on the small bit of wing trim.
Six coats all in all and as the sun was blazing today, I only left around 5 mins between coats. They were dry enough to touch within that time.
Comment