Congratulations!
How long did that take then?
How long did that take then?
-
Current-2004 Impreza PPP wagon
Sold-92 3B coupe-RS2+, 996s, konis, rear torsen, forged rods........
Sold ABY-stock -
each pipe 1:30h, the last pipe 2h.
Audi Quattro WRComment
-
Nice work, looks really good, way better than i thought it would.
Comment
-
you have the patience of a saint!each pipe 1:30h, the last pipe 2h.Current-2004 Impreza PPP wagon
Sold-92 3B coupe-RS2+, 996s, konis, rear torsen, forged rods........
Sold ABY-stockComment
-
.
When i did mine, it took me over an hour to do each runner...the second time around after finding out NOT to overlap the tape cos. you cant feed the tape around for the adjacent runner...drove me...
Spot on there...hope it works, keep everything crossed.Carlos.
On the look out for less bits for my s2 saloon project. Now supporting myself by shooting for my food. www.airgunforum.co.ukComment
-
nice one rok, thats some dedication! Hope it works ok for you
When are you fitting it?
Panthero Coupé quattro 20vt
Indigo ABY coupé
Imola B6 S4 AvantComment
-
Nice work,but hope you know that you must "tie" the warp with metal wire like that:
....
....
....
Comment
-
@Error4040: in a couple of days
Yavor20v: no i didnt know that. why is that a must? i have inox clamps holding the wrap in place.
you can see on this pic, one at each side, and the wrap is tied hard, i dont think it will came loose...?
Last edited by Skull; 12 August 2011, 17:41.Audi Quattro WRComment
-
The warp must be tightened on the runners.The heat under is very very much and the warp is is going fragile like glass..if you hit it with something it'll break on pieces.. The metal wire holds it above and all this stays there for a long time on one piece
Comment
-
what is your wrap made of? there are at least 3 different (that i know of)
my is made of graphite, there are also ceramic and glass fiber wraps...
no fitting instructions came with it
Audi Quattro WRComment
-
All they content glass fiber and ceramic ,but the high temperature melts it
Try the metal wire and everything gonna be OK
Comment
-
This was mine and certainly took a lot of patience. Although it never came apart in the 2 years I had it I would recommend some additional wire at stragic points along its length just to make sure.1986 Coupe q - 2281cc 3B, chargecooler, 2.75" exh & downpipe, ported head, water injection, CGR box, modified MD357 turbo, 440cc injectors, high power coil.
2004 A4 2.5TDi convertible, re-mapped to 180bhp
2011 A5 sportback 3TDi-Backbox delete, remapComment
-
Is zinc coated wire ok?Audi Quattro WRComment
-
.
Probably not, if the zinc coating comes off the wire will just rust away.
i used stuff like this...
http://cgi.ebay.co.uk/Safety-Lock-Wi...item1c0d3c1df7Carlos.
On the look out for less bits for my s2 saloon project. Now supporting myself by shooting for my food. www.airgunforum.co.ukComment
-
its been a couple of days now is it fitted yet Rok?
Panthero Coupé quattro 20vt
Indigo ABY coupé
Imola B6 S4 AvantComment
Comment