My Audi S2 600Hp+ project 56k warning

[Error404]

come on boost. suck in northern europe i think

[terrybullwon]

Hi

I'm assuming these are porsche calipers 421/422 part numbers

Any idea whether these brackets will fit on an RS2 as I want rid of
my troublesome standard rear calipers

Cheers Paul

Sorry Paul that would be a no

Where has the S2 gone?

I have not seen this thread for a few months and the S2 has been replaced by an absolute beast!

In case I missed it, what is the ultimate goal for your car now James?

Cheers,

Steve.

Thanks Steve,

All out Race monster.

End spec

"lighter" weigh shell
Sequential gear box
600-700hp lots of torque
Good data logging
Fully custom suspension set up
a few other special parts

and thats about that

come on boost. suck in northern europe i think

[ciaranthemurph]

Well i ordered my suspension at last!

If you don't mind, approx. cost? (PM if you like). Are you able to buy the top mounts separately?

[andy10v]

Looking good, just gets crazier every time I look.

Is that carbon wrap on the cage to prevent rubbing?

[terrybullwon]

If you don't mind, approx. cost? (PM if you like). Are you able to buy the top mounts separately?

The mounts are made to fit the spring cups so i dont think so. But you could give them a email and ask.

The shocks cost well...... You could buy a nice S2, if you want the exact amount i will tell you via PM

Looking good, just gets crazier every time I look.

Is that carbon wrap on the cage to prevent rubbing?

Ha thanks Andy,

Yes its 3M stuff works well it was a free-bee from my mate

[ciaranthemurph]

The mounts are made to fit the shocks so i dont think so. But you could give them a email and ask.

The shocks cost well...... You could buy a nice S2, if you want the exact amount i will tell you via PM

Thanks, get the general idea. I'd been pointed in their direction a couple of years ago, but never got round to enquiring about them. If they are good enough for EVO's 'Project 8 Minutes' M3, I'm sure that you'll get on fine with them.

Looking forward to photos of them when they arrive.

[terrybullwon]

It's alive again!

Now running no oem wires any where the car is so simple and easy to work around.

Tatech engine loom is perfect and the Ez wiring kit very simple.

I ran the engine up till I had the home signal on tatech as I have not finnished the fuel susply wiring yet

[s2_bo]

[Ross]

Videos, please...

[andy10v]

It's alive again!

Now running no oem wires any where the car is so simple and easy to work around.

Tatech engine loom is perfect and the Ez wiring kit very simple.

I ran the engine up till I had the home signal on tatech as I have not finnished the fuel susply wiring yet

Congratulations! That must be a satisfying feeling.

[terrybullwon]

Will post some of the dash working.

Showing

Boost
AFR
Egt
Rpm
Water
Oil pressure

Just need to wait for the VRS from race technology.

Any one know off hand what ampage the starter solenoid is?

[TimE-J]

Congrats! We need a video or atleast a picture!

[s2driveruk]

are you sure you're not being backrolled by Audi AG or something for a secret retro race series they are dreaming up???? Fantastic and sounds like progress is being made

[terrybullwon]

I got another 15 hours of wiring before I can really combust some fuel.

I need to wire up the rear water pump and control and fuel pumps again, there is a vid of it running last summer a few pages back for those that missed it

[cquattropower]

Wow what a project, just started reading this 1 hour ago, makes my little project seem like a weekend work compared to yours. Good luck and hope it all goes well.